Ebraheim N A, Lu J, Biyani A, Yeasting R A
Department of Orthopaedic Surgery and Anatomy, Medical College of Ohio, Toledo, USA.
Spine (Phila Pa 1976). 1996 Dec 1;21(23):2709-12. doi: 10.1097/00007632-199612010-00002.
This anatomic study describes a new intraosseous, posterior approach to the sacroiliac joint.
To define a transosseous approach to the sacroiliac joint in which a triangular bony window is raised on the posterosuperior aspect of the ilium that provides improved access to the sacroiliac joint for posterior fusion.
A posterior approach to the sacroiliac joint has been widely used for debridement of infectious diseases and for fusion. Most conventional approaches to the sacroiliac joint are interosseous, and there is a relative lack of information on transiliac approaches.
The projection of the sacroiliac joint on the outer table of the ilium and the thickness of the posterior ilium forming part of the sacroiliac joint were determined in 15 cadaveric pelves. A right angle, triangular bony window was raised from the posterior ilium to investigate the suitability of a transiliac approach in performing sacroiliac debridement and arthrodesis. A horizontal reference line 3-3.5 cm in length was drawn between a point 1 cm anterosuperior to the posteroinferior iliac spine and a point 1.5 cm superior to the superior border of the greater sciatic notch. A vertical reference line was extended superiorly for 2-2.5 cm perpendicular to and beginning at the anterior end of the horizontal reference line. The oblique arm of the right triangle was created by joining the superior end of the vertical reference line to the posterior end of the horizontal line.
Thirty percent to fifty percent of the articular surface of the iliac bone was removed with this triangular segment of bone, and a corresponding area of the sacral articular surface was visualized directly. It was possible to remove the rest of the articular cartilage with angled curettes in all specimens.
This approach facilities improved access to the sacroiliac joint for debridement and arthrodesis with minimal soft tissue dissection and iliac bone resection.
本解剖学研究描述了一种新的经骨内后侧入路至骶髂关节。
定义一种经骨入路至骶髂关节,即在髂骨后上侧掀起一个三角形骨窗,以改善骶髂关节后路融合的显露。
骶髂关节后路已广泛用于感染性疾病的清创和融合。大多数传统的骶髂关节入路是经骨间的,而关于经髂骨入路的信息相对较少。
在15具尸体骨盆上确定骶髂关节在髂骨外板上的投影以及构成骶髂关节一部分的髂骨后部厚度。从髂骨后部掀起一个直角三角形骨窗,以研究经髂骨入路在进行骶髂关节清创和关节融合方面的适用性。在髂后下棘前上方1 cm处的点与坐骨大切迹上缘上方1.5 cm处的点之间画一条长度为3 - 3.5 cm的水平参考线。从水平参考线的前端向上垂直延伸一条2 - 2.5 cm长的垂直参考线。通过将垂直参考线的上端与水平线的后端相连形成直角三角形的斜边。
用该三角形骨块切除了30%至50%的髂骨关节面,相应的骶骨关节面区域可直接观察到。在所有标本中,用成角刮匙可以去除其余的关节软骨。
该入路便于在软组织解剖和髂骨切除最少的情况下更好地显露骶髂关节以进行清创和关节融合。