Suppr超能文献

嗜热脂肪芽孢杆菌丙酮酸脱氢酶多酶复合体的组成酶与外周亚基结合结构域的竞争性相互作用:利用表面等离子体共振检测进行动力学分析

Competitive interaction of component enzymes with the peripheral subunit-binding domain of the pyruvate dehydrogenase multienzyme complex of Bacillus stearothermophilus: kinetic analysis using surface plasmon resonance detection.

作者信息

Lessard I A, Fuller C, Perham R N

机构信息

Cambridge Centre for Molecular Recognition, Department of Biochemistry, University of Cambridge, United Kingdom.

出版信息

Biochemistry. 1996 Dec 24;35(51):16863-70. doi: 10.1021/bi961683r.

Abstract

The interactions of the peripheral enzymes (E1, a pyruvate decarboxylase, and E3, dihydrolipoyl dehydrogenase) with the core component (E2, dihydrolipoyl acetyltransferase) of the pyruvate dehydrogenase (PDH) multienzyme complex of Bacillus stearothermophilus have been analyzed using a biosensor based on surface plasmon resonance detection. A recombinant di-domain (lipoyl domain plus peripheral subunit-binding domain) from E2 was attached to the biosensor chip by means of the pendant lipoyl group. The dissociation constant (Kd) for the complex between the peripheral subunit-binding domain and E3 (5.8 x 10(-10) M) was found to be almost twice that for the complex with E1 (3.24 x 10(-10) M). This was due to differences in the rate constants for dissociation (kdiss); these were 1.06 x 10(-3) and 1.87 x 10(-3) s-1 for the complexes with E1 and E3, respectively, whereas the rate constants for association (kass) were identical (3.26 x 10(6) M-1 s-1). Separate studies using non-denaturing polyacrylamide gel electrophoresis confirmed the difference in affinity and demonstrated that E1 can rapidly displace E3 from an E3-di-domain complex and vice versa. The peripheral subunit-binding domain showed no detectable interaction with the E1 alpha subunit of E1 (alpha 2 beta 2) but exhibited a strong affinity for E1 beta (Kd = 8.5 x 10(-9) M), confirming that the E1 beta subunit is responsible for binding E1 to E2. These measurements introduce new features of potential importance into the assembly and mechanism of the multienzyme complex.

摘要

利用基于表面等离子体共振检测的生物传感器,分析了嗜热脂肪芽孢杆菌丙酮酸脱氢酶(PDH)多酶复合体的外周酶(E1,一种丙酮酸脱羧酶,和E3,二氢硫辛酰胺脱氢酶)与核心组分(E2,二氢硫辛酰胺乙酰转移酶)之间的相互作用。通过悬垂的硫辛酰基团,将来自E2的重组双结构域(硫辛酰结构域加外周亚基结合结构域)连接到生物传感器芯片上。发现外周亚基结合结构域与E3之间复合物的解离常数(Kd)(5.8×10⁻¹⁰ M)几乎是与E1复合物解离常数(3.24×10⁻¹⁰ M)的两倍。这是由于解离速率常数(kdiss)存在差异;与E1和E3的复合物的解离速率常数分别为1.06×10⁻³和1.87×10⁻³ s⁻¹,而缔合速率常数(kass)相同(3.26×10⁶ M⁻¹ s⁻¹)。使用非变性聚丙烯酰胺凝胶电泳的单独研究证实了亲和力的差异,并表明E1可以迅速从E3 - 双结构域复合物中取代E3,反之亦然。外周亚基结合结构域与E1的E1α亚基(α₂β₂)未表现出可检测到的相互作用,但对E1β表现出强亲和力(Kd = 8.5×10⁻⁹ M),证实E1β亚基负责将E1与E2结合。这些测量为多酶复合体的组装和机制引入了潜在重要的新特征。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验