Roolker W, Tiel-van Buul M M, Ritt M J, Verbeeten B, Griffioen F M, Broekhuizen A H
Academic Medical Center, University of Amsterdam, Department of Nuclear Medicine, The Netherlands.
J Trauma. 1997 Feb;42(2):247-53. doi: 10.1097/00005373-199702000-00011.
In this study, we evaluated scaphoid X-series, Carpal Box radiographs (longitudinal and transverse), planar tomography, computed tomography (CT), and magnetic resonance imaging (MRI) in the diagnosis of scaphoid fracture. The aim of this study was to evaluate the planar technique in the diagnosis of scaphoid fracture. The use of planar tomography, CT, and MRI was to see whether these methods are useful in the diagnosis of scaphoid fracture when other diagnostics modalities remains negative.
Twenty-eight embalmed human cadaver specimens were used, in 23 of which fractures of the scaphoid were produced mechanically. Scaphoid X-series, Carpal Box posterior-anterior radiographs in ulnar deviation (X-CB), Carpal Box posterior-anterior views with the hand in 15-degree supination and ulnar deviation (X-CB 15-degree) were acted in all specimens, CT in eight wrists, planar tomography in seven wrists, and MRI in five wrists. The anatomic analysis of the specimens was used as the gold standard for comparison. Scaphoid X-series, Carpal Box radiographs, and planar tomography were judged independently and in a blind fashion by six observers, and CT and MRI were also judged independently and in a blind fashion by three radiologists. The observers were asked if they could recognize a scaphoid fracture. The agreement among the six observers for the scaphoid X-series and X-CB was measured.
In the 23 fractured wrists, scaphoid X-series, X-CB, X-CB 15-degree, was true positive in 12, 14, and 15 wrists, respectively, whereas these methods were true negative in cadaver wrists 1, 3, and 5. CT was true positive in five of five fractured wrists and true negative in three of three negative wrists. Planar tomography was true positive in one of four fractured wrists and true negative in two of three nonfractured wrists. MRI was obtained in five wrists (one without a fracture), of which the fracture was recognized in only two. The highest agreement between observers was found in the X-CB 15-degree.
From the planar investigated methods, the 15-degree Carpal Box posterior-anterior, longitudinal and transverse views were most accurate in recognizing scaphoid fracture with also the highest agreement between the observers.
在本研究中,我们评估了舟状骨X线系列、腕骨盒X线片(纵位和横位)、平面断层扫描、计算机断层扫描(CT)以及磁共振成像(MRI)在舟状骨骨折诊断中的作用。本研究的目的是评估平面技术在舟状骨骨折诊断中的价值。使用平面断层扫描、CT和MRI是为了观察当其他诊断方法呈阴性时,这些方法在舟状骨骨折诊断中是否有用。
使用28具经过防腐处理的人体尸体标本,其中23具通过机械方法造成舟状骨骨折。对所有标本均拍摄舟状骨X线系列、尺偏位腕骨盒前后位X线片(X-CB)、手旋前15度并尺偏位的腕骨盒前后位片(X-CB 15度),对8个腕关节进行CT检查,7个腕关节进行平面断层扫描,5个腕关节进行MRI检查。将标本的解剖分析作为比较的金标准。由6名观察者以盲法独立判断舟状骨X线系列、腕骨盒X线片和平面断层扫描结果,3名放射科医生也以盲法独立判断CT和MRI结果。询问观察者是否能识别舟状骨骨折。测量6名观察者对舟状骨X线系列和X-CB的一致性。
在23个骨折腕关节中,舟状骨X线系列、X-CB、X-CB 15度分别在12、14和15个腕关节中呈真阳性,而这些方法在尸体腕关节中分别在1、3和5个腕关节中呈真阴性。CT在5个骨折腕关节中的5个呈真阳性,在3个阴性腕关节中的3个呈真阴性。平面断层扫描在4个骨折腕关节中的1个呈真阳性,在3个未骨折腕关节中的2个呈真阴性。对5个腕关节进行了MRI检查(其中1个无骨折),仅在2个腕关节中识别出骨折。观察者之间一致性最高的是X-CB 15度。
在所研究的平面方法中,手旋前15度并尺偏位的腕骨盒前后位、纵位和横位视图在识别舟状骨骨折方面最准确,观察者之间的一致性也最高。