Farman T T, Kelly M S, Farman A G
University of Louisville, Kentucky, USA.
Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 1997 Feb;83(2):281-7. doi: 10.1016/s1079-2104(97)90017-2.
The purpose of this study was to describe the Orthopantomograph OP 100 Digipan modification and to determine the image-layer and dosimetric characteristics of this system.
Image-layer contours for the Digipan were determined at resolution limits of 4.0, 3.0, and 1.5 line pairs (Ip) mm(-1) using a resolution grid positioned at intervals along the beam projection paths. A hexagonal test device was placed above the grid to determine the magnification factors at the selected resolution limits. For dosimetry, a 30 mm2 ionization chamber was placed at the beam entry points while imaging the molar, premolar, and anterior teeth using both the Digipan and conventional film receptors.
The maximum resolution exceeded 4.0 Ip mm(-1)in the center of the image layer. Using a 1.5 Ip mm(-1) resolution limit, the focal trough width was 14 mm at 0-degree horizontal angulation, 20 mm at 37 degrees, and 36 mm at 83 degrees. At 1.5 Ip mm(-1), the horizontal magnification was -21% facial and +42% lingual to the center of the image layer in the incisor region; -25% facial and +19% lingual to the center of the image layer at a horizontal angulation of 83 degrees. At 4.0 Ip mm(-1), horizontal magnifications in the incisor region were -2.0% facially and +0.5% lingually; at 83 degrees they were -3.9% facially and +1.1% lingually. The neck entrance dose for imaging the anterior and premolar regions averaged 89.5 (+/-5.6) microGy. The cheek entrance doses for imaging the molar region averaged 220.6 (+/-8.0)microGy with the Digipan. With film the average entrance doses were 297.9 (+/-8.6) microGy (anterior and premolar regions) and 682.1 (+/-16.9) microGy (molar region).
The Digipan image layer is similar, but slightly narrower than that previously reported for the Orthopantomograph OP 100 using standard film-screen combinations. The resolution at the center of the image layer exceeded 4.0 Ip mm(-1). The Digipan produced images with an entry dose savings of approximately 70% when compared with photo-timed exposures using conventional film with the Orthopantomograph OP 100.
本研究旨在描述口腔全景X线机OP 100 Digipan的改进,并确定该系统的图像层和剂量学特征。
使用沿射线路径间隔放置的分辨率网格,在4.0、3.0和1.5线对(Ip)mm⁻¹的分辨率极限下确定Digipan的图像层轮廓。在网格上方放置一个六边形测试装置,以确定所选分辨率极限下的放大倍数。对于剂量学研究,在使用Digipan和传统胶片接收器对磨牙、前磨牙和前牙进行成像时,将一个30 mm²的电离室放置在射线入射点处。
图像层中心的最大分辨率超过4.0 Ip mm⁻¹。在1.5 Ip mm⁻¹的分辨率极限下,水平角度为0度时焦槽宽度为14 mm,37度时为20 mm,83度时为36 mm。在1.5 Ip mm⁻¹时,切牙区域水平放大率在图像层中心面部为-21%,舌侧为+42%;水平角度为83度时,在图像层中心面部为-25%,舌侧为+19%。在4.0 Ip mm⁻¹时,切牙区域水平放大率面部为-2.0%,舌侧为+0.5%;83度时面部为-3.