Interaction between poly-3-hydroxybutyrate-co-3-hydroxyvalerate and a denitrifying Pseudomonas strain.

In a laboratory-scale system, dentrification activity of a heterotrophic microbial starter culture changed when different lots of poly-3-hydroxybutyrate-co-3-hydroxyvalerate (P(HB-co-HV)) were used as the solid carbon source in the heterotrophic denitrification reactor. In this study, possible influences of physical and chemical properties of commercially produced P(HB-co-HV) (Biopol) on biofilm formation and metabolic activity of a denitrifying starter culture were investigated. These parameters indicate the polymers' suitability for the application as the matrix substance in the bioreactor. No differences in microstructure were detected between the different lots of polymers. Growth inhibitory effects by chemical additives were found in the case of triacetine, which was included as a plasticizer in seven of eight tested lots. The amount of hydroxyvaleric acid in the polymer was not assumed to affect denitrification activity. Relevant differences could be detected regarding primary adhesion of the starter culture Pseudomonas sp. strain 2nIII. It showed good adsorption properties to hydrophobic substances with a dependence on precultivation conditions. Pseudomonas sp. strain 2nIII degraded poly-3-hydroxybutyrate acid homopolymer and P(HB-co-HV) copolymers but was unable to break up poly-3-hydroxyvaleric acid. A possible reason for these findings is the substrate specifity of the polyhydroxyalkanoate depolymerase.