Utter B, Denny M
J Exp Biol. 1996;199(Pt 12):2645-54. doi: 10.1242/jeb.199.12.2645.
We propose a hydro-mechanical numerical model that predicts the maximal tension to which stipes of the giant kelp Macrocystis pyrifera will be subjected when exposed to ocean waves. Predicted maximal tensions are close to those measured in the field. The strength of Macrocystis pyrifera stipes was measured, allowing our prediction of forces to be translated into a prediction of the fraction of stipes broken. Predicted breakage is low even for extreme storm waves, a testament to the mechanical design of individual kelp fronds. However, empirically measured rates of kelp mortality can be high, considerably higher than those predicted on the basis of hydrodynamic forces acting alone. This indicates that factors not taken into account in our model (such as holdfast dislodgment, entanglement of stipes, damage from herbivory and wave breaking) contribute substantially to mortality in Macrocystis pyrifera.
我们提出了一个流体力学数值模型,该模型可预测巨型海带(Macrocystis pyrifera)的柄在受到海浪冲击时所承受的最大拉力。预测的最大拉力与实地测量值相近。我们测量了Macrocystis pyrifera柄的强度,从而能够将力的预测转化为对柄断裂比例的预测。即使对于极端风暴海浪,预测的断裂率也很低,这证明了单个海带叶片的机械设计。然而,根据经验测量的海带死亡率可能很高,大大高于仅基于流体动力作用所预测的死亡率。这表明我们模型中未考虑的因素(如固着器脱落、柄的缠绕、食草动物造成的损害和破浪)对Macrocystis pyrifera的死亡率有很大影响。