Patterson R M, Nicodemus C L, Viegas S F, Elder K W, Rosenblatt J
Department of Orthopaedic Surgery and Rehabilitation, The University of Texas Medical Branch, Galveston 77555-0892, USA.
J Hand Surg Am. 1998 May;23(3):446-53. doi: 10.1016/S0363-5023(05)80462-9.
Carpal kinematics during a wrist flexion/extension motion using high-speed videodata acquisition was investigated. A cadaver forearm was stabilized, allowing unconstrained excursion of the wrist for passive range of motion (ROM). The extensor and flexor pairs of the wrist were looped together and a 1-lb weight was attached to each pair, simulating synergistic muscle tension. Capitate/radius and third metacarpal/radius angles were calculated to determine which measurement would be best for determining global wrist angle. The average difference in capitate/radius and third metacarpal/radius angles at each respective flexion/extension wrist angle for all wrists was 1.1 degrees +/- 1.6 degrees (the maximum difference was 4 degrees). Hence, the capitate-third metacarpal joint can be considered rigid. Capitate/lunate motion as described by capitate-radius Euler angles ranged from -16.9 to 23.5 with total capitate/lunate motion of 40.5 (35%) in the 114 degrees total global wrist ROM measured. Radius/lunate motion as described by lunate-radius angle ranged from -8.2 to 48.4 with total radius/lunate motion of 56.5 (49%) in the 114 degrees total global wrist ROM measured. During global wrist motion, the radiolunate joint contributes more motion in flexion than the capitolunate joint and the capitolunate joint contributes more motion in extension than the radiolunate joint. The instantaneous screw axes (ISAs) were calculated for each third metacarpal position with respect to the radius. The average distance difference between ISAs for the 4 wrists tested was -1.23 +/- 14.97 pixels. The maximum distance was 56.51 pixels and the minimum was -24.09 pixels. This new combination of motion analysis and 3-dimensional reconstructions of computed tomography images affords a high-speed, dynamic analysis of kinematics. It shows that during wrist flexion/extension, normal carpal kinematics does not have an ISA fixed in or limited to the capitate. In addition, the ISA data provide evidence that translational motion is a real and measurable component of normal carpal motion. These findings alter the understanding of carpal kinematics obtained from the results of previous studies which suggested that the center of rotation was fixed in the capitate.
利用高速视频数据采集技术,对腕关节屈伸运动过程中的腕骨运动学进行了研究。将一具尸体的前臂固定,使腕关节能够自由活动以进行被动活动范围(ROM)测量。腕关节的伸肌和屈肌对被捆绑在一起,每对都系上一个1磅重的物体,模拟协同肌紧张。计算头状骨/桡骨和第三掌骨/桡骨的角度,以确定哪种测量方法最适合确定整体腕关节角度。所有腕关节在各个腕关节屈伸角度下,头状骨/桡骨和第三掌骨/桡骨角度的平均差异为1.1度±1.6度(最大差异为4度)。因此,头状骨-第三掌骨关节可被视为刚性关节。用头状骨-桡骨欧拉角描述的头状骨/月骨运动范围为-16.9至23.5度,在测量的114度总腕关节ROM中,头状骨/月骨的总运动为40.5度(35%)。用月骨-桡骨角描述的桡骨/月骨运动范围为-8.2至48.4度,在测量的114度总腕关节ROM中,桡骨/月骨的总运动为56.5度(49%)。在整体腕关节运动过程中,桡月关节在屈曲时的运动比头月关节更多,而头月关节在伸展时的运动比桡月关节更多。计算了相对于桡骨的每个第三掌骨位置的瞬时螺旋轴(ISA)。测试的4个腕关节的ISA之间的平均距离差异为-1.23±14.97像素。最大距离为56.51像素,最小距离为-24.09像素。这种运动分析与计算机断层扫描图像三维重建的新组合提供了一种高速、动态的运动学分析。结果表明,在腕关节屈伸过程中,正常腕骨运动学中不存在固定于或局限于头状骨的ISA。此外,ISA数据提供了证据,表明平移运动是正常腕骨运动的一个真实且可测量的组成部分。这些发现改变了从先前研究结果中获得的对腕骨运动学的理解,先前的研究表明旋转中心固定在头状骨中。