Influence of vessel distension and myogenic tone on pulmonary arterial input impedance. A study using a computer model of rabbit lung.

A computer model of the pulmonary arterial (PA) bed of rabbit lungs was designed in order to test experimental observations of changes in PA input impedance and pulsatile hydraulic power (cap.) during increased PA pressure. The computer model was based on a simple 3-component analog representation of single vessels (i.e. resistance, inertance and compliance). 16 generations of arterial vessels, from PA to 60 mum diameter, were combined to calculate PA input impedance. Input impedance was found to mimic closely that observed experimentally. Both venous pressure elevation and arteriolar constriction was found to reduce input impedance and Wp. By combining arteriolar constriction with increased myogenic tone of the larger arteries, Wp was found to show a minimum level at a certain PA pressure, dependent on the degree of arterial stiffening. Wp was found to follow changes in arterial volume and resistance during stimulated vasoconstriction. Wp dissipation in arterial vessels was calculated to approx. 50% of total imput Wp at physiological pressure conditions, and could be reduced by one half after PA pressure increase from 20 to 50 cm H2O, despite a concurrent halving of arterial compliance. Arterial vessels smaller than 200 mum diameter were found to have negligible direct influence on PA input impedance.