Intrasolid Interfacial Fractality of a Less-Crystalline Solid.

Small angle X-ray scattering (SAXS) measurements have been carried out on pitch (PIT) and cellulose (CEL)-based activated carbon fibers (ACFs). In the higher angle region, the scattering intensity did not obey the classical Porod's law. This suggests that ACFs have a rough surface and their roughness is expressed by the concept of surface fractal. The surface fractal dimension was determined from SAXS for each ACF. ACFs were treated at high temperature in argon in order to control the nanographitic crystallinity. PIT and CEL lost their microporosity upon heat treatment above 1773 and 2073 K, respectively. These nonporous ACFs showed also a strong SAXS caused by the electron density difference at the interface between microcrystalline and amorphous phase. This interface also had a fractal dimension, which was defined as the interfacial fractal dimension. The surface or interfacial fractal dimension of ACF depended on the heating temperature. As the treating temperature increased, the surface or interfacial fractal dimension decreased from 2.8 to 2.0. Both PIT and CEL showed a similar temperature dependence on each other. The surface or interfacial fractal dimension was reduced with the growth of nanographites, and upon heating at 3173 K, the intrasolid interfacial fractal dimension became 2. Copyright 1998 Academic Press.