Suppr超能文献

弥散模型在大鼠肝脏灌注研究中用于描述未消除参考指标流出稀释曲线的应用。

Application of the dispersion model for description of the outflow dilution profiles of noneliminated reference indicators in rat liver perfusion studies.

作者信息

Schwab A J, Geng W, Pang K S

机构信息

McGill University Medical Clinic, Montreal General Hospital, Quebec, Canada.

出版信息

J Pharmacokinet Biopharm. 1998 Apr;26(2):163-81. doi: 10.1023/a:1020557706994.

Abstract

The dispersion model (DM) is a stochastic model describing the distribution of blood-borne substances within organ vascular beds. It is based on assumptions of concurrent convective and random-walk (pseudodiffusive) movements in the direction of flow, and is characterized by the mean transit time (t) and the dispersion number (inverse Peclet number), DN. The model is used with either closed (reflective) boundary conditions at the inflow and the outflow point (Danckwerts conditions) or a closed condition at the inflow and an open (transparent) condition at the outflow (mixed conditions). The appropriateness of DM was assessed with outflow data from single-pass perfused rat liver multiple indicator dilution (MID) experiments, with varying lengths of the inflow and outflow catheters. The studies were performed by injection, of bolus doses of 51Crlabeled red blood cells (vascular indicator), 125I-labeled albumin and [14C] sucrose (interstitual indicators), and [3H]2O (whole tissue indicator) into the portal vein at a perfusion rate of 12 ml/ min. The outflow profiles based on the DM were convolved with the transport function of the catheters, then fitted to the data. A fairly good fit was obtained for most of the MID curve, with the exception of the late-in-time data (prolonged tail) beyond 3 x [symbol: see text]. The fitted DNS were found to differ among the indicators, and not with the length of the inflow and outflow catheters. But the differences disappeared when a delay parameter, t0 = 4.1 +/- 0.7 sec (x +/- SD), was included as an additional fitted parameter for all of the indicators except water. Using the short catheters, the average DN for the model with delay was 0.31 +/- 0.13 for closed and 0.22 +/- 0.07 for mixed boundary conditions, for all reference indicators. Mean transit times and the variances of the fitted distributions were always smaller than the experimental ones (on average, by 6.8 +/- 3.7% and 58 +/- 19%, respectively). In conclusion, the DM is a reasonable descriptor of dispersion for the early-in-time data and not the late-in-time data. The existence of a common DN for all noneliminated reference indicators suggests that intrahepatic dispersion depends only on the geometry of the vasculature rather than the diffusional processes. The role of the nonsinusoidal ("large") vessels can be partly represented by a simple delay.

摘要

弥散模型(DM)是一种随机模型,用于描述血源性物质在器官血管床内的分布。它基于在血流方向上同时存在对流和随机游走(伪扩散)运动的假设,并以平均通过时间(t)和弥散数(反佩克莱数)DN为特征。该模型可用于流入和流出点处的封闭(反射性)边界条件(丹克沃茨条件),或流入处的封闭条件和流出处的开放(透明)条件(混合条件)。利用单通道灌注大鼠肝脏多指示剂稀释(MID)实验的流出数据,评估了DM的适用性,实验中流入和流出导管的长度各不相同。研究通过以12 ml/分钟的灌注速率将大剂量的51Cr标记红细胞(血管指示剂)、125I标记白蛋白和[14C]蔗糖(间质指示剂)以及[3H]2O(全组织指示剂)注入门静脉来进行。基于DM的流出曲线与导管的传输函数进行卷积,然后拟合数据。除了超过3×[符号:见正文]的后期数据(延长的尾部)外,大多数MID曲线都获得了相当好的拟合。发现拟合的DN在指示剂之间存在差异,且与流入和流出导管的长度无关。但是,当将延迟参数t0 = 4.1±0.7秒(x±SD)作为除水以外的所有指示剂的额外拟合参数时,差异消失。使用短导管时,对于所有参考指示剂,具有延迟的模型在封闭边界条件下的平均DN为0.31±0.13,在混合边界条件下为0.22±0.07。拟合分布的平均通过时间和方差始终小于实验值(平均分别小6.8±3.7%和58±19%)。总之,DM是早期数据而非后期数据弥散的合理描述符。所有未消除的参考指示剂存在共同的DN表明肝内弥散仅取决于脉管系统的几何形状,而非扩散过程。非正弦(“大”)血管的作用可以部分由一个简单的延迟来表示。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验