Cao Y L, Lach E, Kim T H, Rodríguez A, Arévalo C A, Vacanti C A
Department of Anesthesia, University of Massachusetts Medical Center, Worcester 01655, USA.
Plast Reconstr Surg. 1998 Dec;102(7):2293-8. doi: 10.1097/00006534-199812000-00002.
We describe a simple, effective approach to the creation of autologous tissue-engineered cartilage in the shape of a human nipple by injecting a reverse thermosensitive polymer seeded with autologous chondrocytes in an immunocompetent porcine animal model. A biodegradable, biocompatible copolymer of polyethylene oxide and polypropylene oxide (Pluronic F-127), which exists as a liquid below 4 degrees C and polymerizes to a thick gel when it is exposed to physiologic temperatures (body temperatures), was used as a vehicle for chondrocyte delivery and as a scaffold to guide growth. Autologous chondrocytes isolated from porcine auricular elastic cartilage and suspended in 30% (weight/volume) Pluronic F-127 were injected on the ventral surface of the pigs from which the cells had been isolated. A circumferential subdermal suture was used to support the contour of the implant and assist in its projection in the form of a human nipple. After 3 weeks, the skin over and surrounding the implant was tattooed to create the appearance of a human nipple-areolar complex. As controls, an equal number of injections were made using either cells alone (not suspended in hydrogel), or hydrogel alone. After 10 weeks, all specimens were excised and examined both grossly and histologically. Before harvesting, visual inspection of the tattooed chondrocyte-Pluronic F-127 hydrogel implant sites revealed that they closely resembled a human female nipple-areolar complex. Nodules were similar in size, shape, and texture to a human nipple at each injection site. Glistening opalescent tissue was surgically isolated from each implant site. Hematoxylin and eosin, safranine o, trichrome blue, and Verhoeff's stains of the experimental implants showed nodules with the characteristic histologic signs of elastic cartilage. Control injections of copolymer hydrogel alone exhibited no evidence of cartilage formation. Control injections of chondrocytes alone showed evidence of dissociated microscopic nodules of elastic cartilage.
我们描述了一种简单有效的方法,通过在具有免疫活性的猪动物模型中注射接种自体软骨细胞的反向热敏聚合物,来创建人乳头形状的自体组织工程软骨。一种由聚环氧乙烷和聚环氧丙烷组成的可生物降解、生物相容的共聚物(泊洛沙姆F-127),在4摄氏度以下呈液体状态,暴露于生理温度(体温)时会聚合成浓稠的凝胶,被用作软骨细胞递送的载体和引导生长的支架。从猪耳弹性软骨中分离出的自体软骨细胞悬浮在30%(重量/体积)的泊洛沙姆F-127中,注射到分离出细胞的猪的腹侧表面。使用环形皮下缝合来支撑植入物的轮廓,并帮助其呈现人乳头的形状。3周后,对植入物上方和周围的皮肤进行纹身,以营造人乳头乳晕复合体的外观。作为对照,分别单独注射细胞(不悬浮在水凝胶中)或单独注射水凝胶,注射数量相同。10周后,切除所有标本并进行大体和组织学检查。在收获前,对纹身的软骨细胞-泊洛沙姆F-127水凝胶植入部位进行目视检查,发现它们与人类女性乳头乳晕复合体非常相似。每个注射部位的结节在大小、形状和质地方面与人类乳头相似。从每个植入部位手术分离出有光泽的乳白色组织。对实验植入物进行苏木精和伊红、番红O、三色蓝和韦尔霍夫染色,结果显示结节具有弹性软骨的特征性组织学迹象。单独注射共聚物水凝胶的对照未显示软骨形成的迹象。单独注射软骨细胞的对照显示有弹性软骨的离散微小结节的迹象。