Suppr超能文献

啮齿动物输精管的激光焊接:使用流体焊料的初步经验。

Laser welding of vas deferens in rodents: initial experience with fluid solders.

作者信息

Trickett R I, Wang D, Maitz P, Lanzetta M, Owen E R

机构信息

Microsearch Foundation of Australia, Sydney, NSW.

出版信息

Microsurgery. 1998;18(7):414-8. doi: 10.1002/(sici)1098-2752(1998)18:7<414::aid-micr5>3.0.co;2-w.

Abstract

This study evaluates the use of sutureless laser welding for vasovasostomy. In 14 rodents, the left vas deferens underwent vasovasostomy using an albumin-based solder applied to the adventitia of the vas deferens. The solder contained the dye, indocyanine green, to allow selective absorption and denaturation by a fiber-coupled 800-nm diode laser. The right vas deferens served as a control, receiving conventional layered microsurgical repair. We used a removable 4/0 nylon stent and microclamps to appose the vas deferens during repair, with no need for stay sutures. The mean time to perform laser solder repair (23.5 min) and conventional repair (23.3 min) were not significantly different (P=0.91). However, examination after 8 weeks showed that granuloma formation (G) and patency (P) rates for the conventional suture technique (G, 14%; P, 93%) were significantly better than observed for the laser solder technique (G, 57%; P, 50%).

摘要

本研究评估了无缝合激光焊接技术在输精管吻合术中的应用。在14只啮齿动物身上,对左侧输精管进行输精管吻合术,使用基于白蛋白的焊料涂抹于输精管外膜。该焊料含有染料吲哚菁绿,以便通过光纤耦合800纳米二极管激光进行选择性吸收和变性。右侧输精管作为对照,接受传统的分层显微外科修复。我们在修复过程中使用了可移除的4/0尼龙支架和微型夹钳来对合输精管,无需定位缝线。进行激光焊接修复的平均时间(23.5分钟)和传统修复的平均时间(23.3分钟)无显著差异(P = 0.91)。然而,8周后的检查显示,传统缝合技术的肉芽肿形成(G)率(14%)和通畅(P)率(93%)明显优于激光焊接技术(G,57%;P,50%)。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验