Gijsen F J, van de Vosse F N, Janssen J D
Department of Mechanical Engineering, Eindhoven University of Technology, Eindhoven, Netherlands.
J Biomech. 1999 Jun;32(6):601-8. doi: 10.1016/s0021-9290(99)00015-9.
Laser Doppler anemometry experiments and finite element simulations of steady flow in a three dimensional model of the carotid bifurcation were performed to investigate the influence of non-Newtonian properties of blood on the velocity distribution. The axial velocity distribution was measured for two fluids: a non-Newtonian blood analog fluid and a Newtonian reference fluid. Striking differences between the measured flow fields were found. The axial velocity field of the non-Newtonian fluid was flattened, had lower velocity gradients at the divider wall, and higher velocity gradients at the non-divider wall. The flow separation, as found with the Newtonian fluid, was absent. In the computations, the shear thinning behavior of the analog blood fluid was incorporated through the Carreau-Yasuda model. The viscoelastic properties of the fluid were not included. A comparison between the experimental and numerical results showed good agreement, both for the Newtonian and the non-Newtonian fluid. Since only shear thinning was included, this seems to be the dominant non-Newtonian property of the blood analog fluid under steady flow conditions.
进行了激光多普勒测速实验以及颈动脉分叉三维模型中稳定流动的有限元模拟,以研究血液的非牛顿特性对速度分布的影响。测量了两种流体的轴向速度分布:一种非牛顿血液模拟流体和一种牛顿参考流体。发现测量的流场之间存在显著差异。非牛顿流体的轴向速度场变平,在分流壁处速度梯度较低,在非分流壁处速度梯度较高。未发现牛顿流体中出现的流动分离现象。在计算中,通过卡罗厄 - 亚苏达模型考虑了模拟血液流体的剪切变稀行为。未包括流体的粘弹性特性。实验结果与数值结果的比较表明,对于牛顿流体和非牛顿流体,二者吻合良好。由于仅考虑了剪切变稀,这似乎是稳定流动条件下血液模拟流体的主要非牛顿特性。