Time-domain quantification of multiple-quantum-filtered (23)Na signal using continuous wavelet transform analysis.

The application of continuous wavelet transform (CWT) analysis technique is presented to analyze multiple-quantum-filtered (MQF) (23)Na magnetic resonance spectroscopy (MRS) data. CWT acts on the free-induction-decay (FID) signal as a time-frequency variable filter. The signal-to-noise ratio (SNR) and frequency resolution of the output filter are locally increased. As a result, MQF equilibrium longitudinal magnetization and the apparent fast and slow transverse relaxation times are accurately estimated. A developed iterative algorithm based on frequency signal detection and components extraction, already proposed, was used to estimate the values of the signal parameters by analyzing simulated time-domain MQF signals and data from an agarose gel. The results obtained were compared to those obtained by measurement of signal height in frequency domain as a function of MQF preparation time and those obtained by a simple time-domain curve fitting. The comparison indicates that the CWT approach provides better results than the other tested methods that are generally used for MQF (23)Na MRS data analysis, especially when the SNR is low. The mean error on the estimated values of the amplitude signal and the apparent fast and slow transverse relaxation times for the simulated data were 2.19, 6. 63, and 16.17% for CWT, signal height in frequency domain, and time-domain curve fitting methods, respectively. Another major advantage of the proposed technique is that it allows quantification of MQF (23)Na signal from a single FID and, thus, reduces the experiment time dramatically.