Kaetsu I, Kumakura M, Yoshida M
Biotechnol Bioeng. 1979 May;21(5):847-61. doi: 10.1002/bit.260210508.
Enzyme immobilization by radiation-induced polymerization of hydrophilic glass-forming monomers, such as 2-hydroxyethyl methacrylate, was studied. Enzyme radiation damage could be sufficiently retarded at low temperatures. The immobilized enzyme activity yield was markedly higher at low temperature than at higher temperature polymerization. At low temperatures the polymerized composite had a porous structure owing to ice crystallization which depends on the monomer concentration. It was deduced that the enzyme was partially trapped on the polymer surface, partially isolated in the pore, and partially occluded inside the polymer matrix. A decrease in activity caused by enzyme leakage was observed with repeated use in enzyme reactions where the composites had a large porosity. The activity yield showed a maximum at certain optimum porosities, i.e., at optimum monomer concentrations. Continuous enzyme reaction was preferably carried out using immobilized enzyme columns.
研究了通过辐射诱导亲水性玻璃形成单体(如甲基丙烯酸2-羟乙酯)聚合来固定化酶。在低温下,酶的辐射损伤可以得到充分延缓。低温聚合时固定化酶的活性产率明显高于高温聚合时。在低温下,由于取决于单体浓度的冰结晶作用,聚合复合材料具有多孔结构。据推测,酶部分被困在聚合物表面,部分隔离在孔隙中,部分被封闭在聚合物基质内部。在复合材料孔隙率较大的酶反应中,重复使用时观察到由于酶泄漏导致活性下降。活性产率在某些最佳孔隙率下,即最佳单体浓度下达到最大值。连续酶反应最好使用固定化酶柱进行。