Suppr超能文献

多孔涂层膝关节置换术中的骨整合。部件涂层类型对绵羊的影响。

Osseointegration in porous coated knee arthroplasty. The influence of component coating type in sheep.

作者信息

Bellemans J

机构信息

Department of Orthopedics, Pellenberg University Hospital, Catholic University, Leuven, Belgium.

出版信息

Acta Orthop Scand Suppl. 1999 Oct;288:1-35.

Abstract

Although cementless knee arthroplasty is a commonly performed procedure, to date very little was known about the process of osseointegration of knee arthroplasty components. Using a knee prosthesis that was specially designed for the sheep stifle joint, this process of osseointegration could be studied in vivo, together with its effects on clinical and functional performance, its influence on mechanical fixation, and its influence on component stability or migration over time. Additionally, the osseointegration capacity of a newly developed cast mesh porous coating could be examined. The rationale for this newly developed coating was to provide a surface texture with theoretically superior osseointegration capacity, by offering a larger and better controlled pore size, with higher ingrowth area compared to conventional bead type coatings. In summary, the conclusions that are drawn from this work are the following: 1. The degree of osseointegration of knee arthroplasty components is not correlated with clinical and functional performance. Knee arthroplasty components with fibrous integration can function as well as osseointegrated components at least during the first years after implantation. This explains the occasional reports in the literature of post mortem retrieved, well functioning knee arthroplasty components, with purely fibrous integration on histomorphometric analysis. 2. Fibrous integration of tibial knee arthroplasty components, however, leads to less mechanical fixation strength of these components. Osseointegrated components are much more strongly fixed to the underlying bone. This difference in mechanical fixation strength is detectable under physiologic loads. 3. Fibrous integration of tibial knee arthroplasty components leads to increased migration, becoming apparent after 1 year with radiostereometric analysis (RSA). Osseointegrated components are significantly more stable over time. 4. Fibrous integration is less desirable, since it leads to mechanically less rigidly fixed implants, and subsequently to migration over time. On the long-term, fibrous integration might therefore lead to loosening. 5. RSA is an effective tool to assess migration of knee arthroplasty components. The RSA migration of an uncemented component is also an indicator of its degree of osseointegration and its mechanical fixation strength, since RSA migration is correlated with these two parameters. RSA is therefore especially useful during the first postoperative years, since increased migration indicates fibrous integration and low mechanical fixation strength, suggesting an increased risk for subsequent loosening at a later stage. Patients with increased early component migration on RSA might therefore be advised to impose specific restrictions on their knee arthroplasty. 6. Osseointegration is not routinely achieved in conventional porous coated tibial knee arthroplasty components. The development of a theoretically superior cast mesh coating did not lead to a significantly higher degree of osseointegration. It is suggested that the lack of sufficiently small interface gaps and the lack of sufficiently small interface micromotion--two known prerequisites for reliable osseointegration to occur--are the main reasons inhibiting osseointegration, both in this animal model and in the human situation. 7. Significant osseointegration, however, does occur in the newly developed cast mesh coated components, when they are additionally coated with a vacuum plasma sprayed 50 microns hydroxyapatite layer. The newly developed cast mesh coating is ideally suited for such an additional hydroxyapatite coating. Remarkably high percentages of both bone ingrowth and ongrowth can be seen with these hydroxyapatite coated cast mesh coatings, higher than so far reported for current tibial knee arthroplasty components. These osseointegrated hydroxyapatite coated cast mesh components show significantly higher mechanical fixation strength and lower RSA migratio

摘要

尽管非骨水泥型膝关节置换术是一种常见的手术,但迄今为止,对于膝关节置换部件的骨整合过程知之甚少。使用一种专门为绵羊膝关节设计的膝关节假体,可以在体内研究这种骨整合过程,以及它对临床和功能表现的影响、对机械固定的影响,以及对部件稳定性或随时间迁移的影响。此外,还可以检查一种新开发的铸造网状多孔涂层的骨整合能力。这种新开发涂层的基本原理是通过提供比传统珠状涂层更大且控制更好的孔径以及更高的向内生长面积,来提供一种理论上具有卓越骨整合能力的表面纹理。总之,这项研究得出的结论如下:1. 膝关节置换部件的骨整合程度与临床和功能表现无关。至少在植入后的头几年,纤维性整合的膝关节置换部件与骨整合部件的功能一样好。这就解释了文献中偶尔出现的关于尸检取出的膝关节置换部件功能良好,但组织形态计量学分析显示为单纯纤维性整合的报道。2. 然而,胫骨膝关节置换部件的纤维性整合会导致这些部件的机械固定强度降低。骨整合部件与下方骨骼的固定更为牢固。在生理负荷下可以检测到这种机械固定强度的差异。3. 胫骨膝关节置换部件的纤维性整合会导致迁移增加,在术后1年通过放射立体测量分析(RSA)可以明显看出。随着时间的推移,骨整合部件明显更稳定。4. 纤维性整合不太理想,因为它会导致植入物的机械固定不够牢固,进而导致随时间迁移。因此,从长期来看,纤维性整合可能会导致松动。5. RSA是评估膝关节置换部件迁移的有效工具。非骨水泥部件的RSA迁移也是其骨整合程度和机械固定强度的指标,因为RSA迁移与这两个参数相关。因此,RSA在术后头几年特别有用,因为迁移增加表明纤维性整合和机械固定强度低,提示后期松动风险增加。因此,对于RSA显示早期部件迁移增加的患者,可能建议对其膝关节置换进行特定限制。6. 在传统的多孔涂层胫骨膝关节置换部件中,骨整合并非常规实现。理论上更优越的铸造网状涂层的开发并未导致显著更高程度的骨整合。有人认为,缺乏足够小的界面间隙和足够小的界面微动——可靠骨整合发生的两个已知先决条件——是抑制骨整合的主要原因,在这种动物模型和人类情况中都是如此。7. 然而,当新开发的铸造网状涂层部件额外涂覆一层50微米厚的真空等离子喷涂羟基磷灰石层时,确实会发生显著的骨整合。新开发的铸造网状涂层非常适合这种额外的羟基磷灰石涂层。在这些羟基磷灰石涂覆的铸造网状涂层中,可以看到非常高比例的骨向内生长和附着生长,高于目前胫骨膝关节置换部件迄今所报道的比例。这些骨整合的羟基磷灰石涂覆铸造网状部件显示出显著更高的机械固定强度和更低的RSA迁移率。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验