Sorption Studies of Cobalt(II) on Colloidal Hematite Using Potentiometry and Radioactive Tracer Technique.

The sorption of Co(II) on colloidal hematite was studied as a function of pH, ionic strength, and Co(II) concentration. Two different techniques were used, yielding two different sets of information: (i) potentiometric titrations that provide information on the number of protons released as a function of pH owing to the sorption of Co(II) and (ii) measurement of the amount of cobalt sorbed on the surface as a function of pH using a radioactive tracer, (60)Co. At low Co(II) concentrations (10(-8) M), the sorption was found to be independent of ionic strength but there seems to be a weak ionic strength dependence at higher Co(II) concentrations (10(-4) M). The adsorption edge moved to higher pH with increasing Co(II) concentration. For the high Co(II) concentration, the number of protons released per cobalt sorbed increased from zero to approximately 1.5. The basic charging properties of hematite were modeled with four different surface complexation models. The 1-pK Basic Stern Model (BSM), with binding of electrolyte ions to the Stern plane, seems to be the most reasonable model if the ambition is to describe experimental data at different ionic strengths. The sorption of cobalt was modeled with the 1-pK BSM. By introducing a low concentration of high affinity surface sites for cobalt sorption it was possible to model the sorption in very wide cobalt concentrations, ranging from 10(-8) M to 10(-4) M. Copyright 2000 Academic Press.