Suppr超能文献

人工晶状体材料和设计对术后囊内细胞反应性的影响。

Influence of intraocular lens material and design on postoperative intracapsular cellular reactivity.

作者信息

Apple D J

机构信息

Center for Research on Ocular Therapeutics and Biodevices, Storm Eye Institute, Medical University of South Carolina, Charleston, USA.

出版信息

Trans Am Ophthalmol Soc. 2000;98:257-83.

Abstract

PURPOSE

To evaluate the influence of intraocular lens (IOL) material and design on the outcome of postoperative lens epithelial cell proliferation within the capsular bag after cataract surgery.

METHODS

A total of 5,079 human globes containing rigid and foldable posterior chamber IOL styles commonly implanted in the United States (n = 8) were analyzed in this study. Each globe, fixated in 10% formalin, was sectioned at the equator and analyzed using the Miyake-Apple posterior technique. The study consisted of 3 parts: First, to evaluate posterior capsule opacification (PCO); the Nd:YAG laser posterior capsulotomy rate (%) was documented and plotted on a monthly basis, creating a computerized trend line for each IOL style. Second, to evaluate anterior capsule opacification (ACO); 460 globes were processed for histologic examination. Anterior capsule fibrosis was scored from 0 to III, according to the thickness of proliferative tissue/cells on the inner surface of the anterior capsule at the capsulorhexis margin. Third, interlenticular opacification (ILO) was studied by analysis of 3 pairs of acrylic piggyback lenses that had been explanted because of opacification between their optics. Each IOL pair was processed for histologic examination, and scanning electron microscopy was performed on 1 of the lenses.

RESULTS

In the first study, relatively higher Nd:YAG laser posterior capsulotomy rates (19.1% to 32.8%) were noted with the 4 oldest IOL designs in this study (2 foldable lenses, 1 3-piece polymethyl methacrylate [PMMA] design, and 1 single-piece all-PMMA design). Four modern lenses, 1 acrylic lens, and 3 silicone foldable IOL designs had Nd:YAG rates ranging from 1.3% to 14.6% (P < .0001). In the second study, mean ACO scores were highest with silicone-plate lenses (1.77 +/- 0.86 and 1.28 +/- 0.77). The lowest mean score was observed with the acrylic lens (0.51 +/- 0.52; P < .0001). In study 3, the analyses of the 3 pairs of explanted acrylic piggyback lenses showed that the opacification between them (ILO) may have different forms.

CONCLUSIONS

Control of postoperative intracapsular cellular proliferation is important in avoiding 3 significant clinical complications. Postoperative lens epithelial cell proliferation is involved in the pathogenesis of PCO, ACO, and ILO, the latter being a newly described form of opacification within the capsular bag related to piggyback IOL implantation. IOL material and design are important factors influencing the outcome of these complications.

摘要

目的

评估人工晶状体(IOL)材料和设计对白内障手术后囊袋内晶状体上皮细胞增殖结果的影响。

方法

本研究分析了总共5079个含有在美国常见植入的硬性和可折叠后房型IOL样式(n = 8)的人眼球。每个固定在10%福尔马林中的眼球在赤道处切片,并使用三浦-苹果后囊技术进行分析。该研究包括3个部分:第一,评估后囊混浊(PCO);记录钕:钇铝石榴石激光后囊切开率(%)并按月绘制,为每种IOL样式创建计算机化趋势线。第二,评估前囊混浊(ACO);对460个眼球进行组织学检查。根据撕囊边缘前囊内表面增殖组织/细胞的厚度,将前囊纤维化从0到III进行评分。第三,通过分析3对因光学元件之间混浊而被取出的丙烯酸背驮式人工晶状体来研究晶状体间混浊(ILO)。对每对IOL进行组织学检查,并对其中1个晶状体进行扫描电子显微镜检查。

结果

在第一项研究中,本研究中4种最老的IOL设计(2种可折叠晶状体、1种三件式聚甲基丙烯酸甲酯[PMMA]设计和1种一体式全PMMA设计)的钕:钇铝石榴石激光后囊切开率相对较高(19.1%至32.8%)。4种现代晶状体、1种丙烯酸晶状体和3种硅酮可折叠IOL设计的钕:钇铝石榴石激光切开率在1.3%至14.6%之间(P <.0001)。在第二项研究中,硅酮板状晶状体的平均ACO评分最高(1.77 +/- 0.86和1.28 +/- 0.77)。丙烯酸晶状体的平均评分最低(0.51 +/- 0.

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验