Simplified in-line sample preparation for amino acid analysis in carbohydrate containing samples.

This report describes a new, automated chromatographic procedure eliminating carbohydrates from amino acid samples prior to their analysis by anion-exchange chromatography and integrated amperometric detection. In the first step, a sample is brought onto a short cation-exchange column (trap column) in hydrogen form. Carbohydrates are passing through this column, while only amino acids are retained. Subsequently, the cation-exchange column, holding the amino acid fraction, is switched in-line with the gradient pump and separator column. The mobile phase used at the beginning of the separation (NaOH; pH 12.7) transfers amino acids from the trap column onto the anion-exchange column and the amino acid separation is completed without any interference by carbohydrates. All common amino acids are recovered following the carbohydrate removal step. The average value of their recovery is 88.1%. The calibration plots were tested between 12.5 and 500 pmol (amounts injected). The mean value of correlation coefficients of calibration plots was calculated as 0.99. The mean value of relative standard deviations from five replicates was 3.9%. The usefulness of the method is illustrated with two chromatograms of a carrot juice sample obtained before and after the in-line removal of carbohydrates.