Bunch T E, Schultz P, Cassen P, Brownlee D, Podolak M, Lissauer J, Reynolds R, Chang S
NASA Ames Research Center, Moffett Field, California 94035, USA.
Icarus. 1991;91:76-92. doi: 10.1016/0019-1035(91)90127-f.
Observations and experimental evidence are presented to support the hypothesis that high-speed impact into a parent body regolith can best explain certain textures and compositions observed for rims on some chondrules. A study of 19 interclastic rimmed chondrules in the Weston (H 3/4) ordinary chondrite shows that two main rim types are present on porphyritic olivine-pyroxene (POP) and porphyritic pyroxene (PP) chondrules: granular and opaque rims. Granular rims are composed of welded, fine-grained host chondrule fragments. Bulk compositions of granular rims vary among chondrules, but each rim is compositionally dependent on that of the host chondrule. Opaque rims contain mineral and glass compositions distinctly different from those of the host, partially reacted chondrule mantle components, and some matrix grains. Opaque rims are greatly enriched in FeO (up to 63 wt%). The original chondrule pyroxene compositional zonation patterns and euhedral grain outlines are discontinuous at the chondrule/rim interface. Opaque rims are dominated by fayalitic olivine (Fa92-56), with high Al2O3 content (0.78-3.15%), which makes them distinctly different from primary olivine, but similar to Fe-olivine in chondrule rims of other meteorites. Thin zones of chondrule minerals adjacent to the present rims are intermediate in FeO content between the Mg-rich interior and the Fe-rich rim, which indicates a reaction relationship. Regardless of conclusions drawn regarding other types of rims, granular and opaque rim characteristics appear to be inconsistent with nebular condensation, in that host and matrix fragments are included within the rim. We have initiated a series of experiments, using the Ames two-stage light gas gun, to investigate the hypothesis that the Weston chondrule rims are the result of thermal and mechanical alteration upon impact into a low-density medium. Clusters of approximately 200-micron-sized silicate particles were fired into aerogel (density = 0.1 g cm-3) at velocities of 5.6, 4.7, and 2.2 km sec-1. Recovered grains show characteristics that range from fragmented projectile grains mixed with melted aerogel that nearly rim the grains to grains that have melted aerogel clumps mixed with partially melted projectile. These experimental results demonstrate that rim-like thermal and mechanical alteration of projectiles can result from a high-velocity encounter with a low-density target. Therefore, experiments using appropriately chosen projectile and target materials can provide a test of the hypothesis that chondrule rims common to Weston and possibly other ordinary chondrites were formed by such a process.
本文提供了观测结果和实验证据,以支持这样一种假说:高速撞击母天体的风化层能够最好地解释在一些球粒上观察到的某些边缘的纹理和成分。对韦斯顿(H 3/4)普通球粒陨石中19个碎屑边缘球粒的研究表明,在斑状橄榄石 - 辉石(POP)和斑状辉石(PP)球粒上存在两种主要的边缘类型:颗粒状边缘和不透明边缘。颗粒状边缘由焊接在一起的细粒基质球粒陨石碎片组成。颗粒状边缘的整体成分在不同球粒之间有所变化,但每个边缘在成分上都依赖于基质球粒。不透明边缘包含与基质明显不同的矿物和玻璃成分、部分反应的球粒幔成分以及一些基质颗粒。不透明边缘的FeO含量大幅富集(高达63 wt%)。原始球粒辉石的成分分带模式和自形晶粒轮廓在球粒/边缘界面处是不连续的。不透明边缘主要由铁橄榄石(Fa92 - 56)主导,Al2O3含量较高(0.78 - 3.15%),这使得它们与原生橄榄石明显不同,但与其他陨石球粒边缘中的铁橄榄石相似。与当前边缘相邻的球粒矿物薄带的FeO含量介于富镁内部和富铁边缘之间,这表明存在反应关系。无论关于其他类型边缘得出何种结论,颗粒状和不透明边缘的特征似乎与星云凝聚不一致,因为基质和基质碎片包含在边缘内。我们已经启动了一系列实验,使用艾姆斯两级轻气炮,来研究韦斯顿球粒边缘是撞击低密度介质时热和机械改变的结果这一假说。将大约200微米大小的硅酸盐颗粒簇以5.6、4.7和2.2千米每秒的速度发射到气凝胶(密度 = 0.1克/立方厘米)中。回收的颗粒显示出的特征范围从与几乎包裹颗粒的熔化气凝胶混合的破碎抛射颗粒到与部分熔化的抛射体混合有熔化气凝胶团块的颗粒。这些实验结果表明,抛射体的边缘状热和机械改变可由与低密度靶体的高速碰撞产生。因此,使用适当选择的抛射体和靶体材料进行的实验可以检验这样一种假说,即韦斯顿以及可能其他普通球粒陨石中常见的球粒边缘是由这样一个过程形成的。