Sambaiah Thota, Li Lih-Ping, Huang Daw-Jen, Lin Cheng-Hong, Rayabarapu Dinesh Kumar, Cheng Chien-Hong
Department of Chemistry, National Tsing Hua University, Hsinchu, Taiwan 30043.
J Org Chem. 1999 May 14;64(10):3663-3670. doi: 10.1021/jo9900580.
Cyclic enones 2-cyclohexen-1-one (1a), 4,4-dimethyl-2-cyclohexen-1-one (1b), 2-cyclopenten-1-one (1c), and 2-cyclohepten-1-one (1d) react with octa-1,7-diyne (2) in THF in the presence of Ni(PPh(3))(2)I(2), ZnI(2), and Zn powder at 62 degrees C to give [2 + 2 + 2] cycloaddition-dehydrogenation products 3a-d in 32-80% yields. alpha,beta-Unsaturated lactone 5a (5,6-dihydro-2H-pyran-2-one) undergoes [2 + 2 + 2] cycloaddition with 2 to give both the corresponding cyclohexadiene product 6 (29%) and dehydrogenation product 7 (39%). Under similar reaction conditions, 3-buten-2-one reacts with 2 and various substituted hepta-1,6-diynes 9a-c to give [2 + 2 + 2] cycloaddition-dehydrogenation products 11a-d in 68-80% yields. Diphenylacetylene also reacts with 1a-d, 5a, and 2(5H)-furanone (5b) to afford the corresponding [2 + 2 + 2] cocyclotrimerization products 13a-d and 14a-b. No dehydrogenation of products 13 and 14 was observed under the reaction and workup conditions. The reactions of acrylates with alkynes catalyzed by nickel complexes give products that depend greatly on the reaction conditions. Treating ethyl acrylate (15a) with 1-phenyl-1-propyne (16) in the presence of Ni(PPh(3))(2)Cl(2) and Zn at 90 degrees C in toluene affords cocyclotrimerization product 19aas the major product (54% yield). However, treatment of CH(2)CHCOOR (R = Et and t-Bu) with mono alkynes 16 and 12 in the presence of Ni(PPh(3))(2)X(2) (X = Cl and I) and Zn powder in toluene at 60 degrees C affords the corresponding conjugated trienes 17a-c in 82-92% yields. The MS data of 17firmly support an adduct of two molecules of alkyne and a molecule of acrylate. Similarly, the reaction of 15a with octa-1,7-diyne in the presence of Ni(PPh(3))(2)I(2), ZnI(2), and zinc gives triene derivative 21 in 68% yield. NOE and X-ray results indicate that in these trienes the substituents from each alkyne and alkene moiety are cis to each other. The unique stereoselectivity can be attributed to the exclusive formation of seven-membered nickelacycloheptadiene intermediate 25during the catalytic reaction.
环状烯酮2-环己烯-1-酮(1a)、4,4-二甲基-2-环己烯-1-酮(1b)、2-环戊烯-1-酮(1c)和2-环庚烯-1-酮(1d)在四氢呋喃中,于62℃下,在Ni(PPh(3))(2)I(2)、ZnI(2)和锌粉存在的条件下与1,7-辛二炔(2)反应,以32 - 80%的产率得到[2 + 2 + 2]环加成-脱氢产物3a - d。α,β-不饱和内酯5a(5,6-二氢-2H-吡喃-2-酮)与2发生[2 + 2 + 2]环加成反应,生成相应的环己二烯产物6(产率29%)和脱氢产物7(产率39%)。在相似的反应条件下,3-丁烯-2-酮与2以及各种取代的1,6-庚二炔9a - c反应,以68 - 80%的产率得到[2 + 2 + 2]环加成-脱氢产物11a - d。二苯乙炔也与1a - d、5a和2(5H)-呋喃酮(5b)反应,得到相应的[2 + 2 + 2]共环三聚产物13a - d和14a - b。在反应及后处理条件下未观察到产物13和14的脱氢现象。镍配合物催化的丙烯酸酯与炔烃的反应产物很大程度上取决于反应条件。在90℃下,于甲苯中,在Ni(PPh(3))(2)Cl(2)和锌存在的条件下,用1-苯基-1-丙炔(16)处理丙烯酸乙酯(15a),得到共环三聚产物19a作为主要产物(产率54%)。然而,在60℃下,于甲苯中,在Ni(PPh(3))(2)X(2)(X = Cl和I)和锌粉存在的条件下,用单炔烃16和12处理CH(2)CHCOOR(R = Et和t-Bu),以82 - 92%的产率得到相应的共轭三烯17a - c。17的质谱数据有力地支持了两个炔烃分子和一个丙烯酸酯分子的加合物。同样,在Ni(PPh(3))(2)I(2)、ZnI(2)和锌存在的条件下,15a与1,7-辛二炔反应,以68%的产率得到三烯衍生物21。核磁共振欧沃豪斯效应(NOE)和X射线结果表明,在这些三烯中,每个炔烃和烯烃部分的取代基彼此为顺式。这种独特的立体选择性可归因于催化反应过程中七元镍环庚二烯中间体25的唯一形成。