Rheological evaluation of the interactions between cationic celluloses and Carbopol 974P in water.

This paper reports on the influence of the structural properties of two cationic hydroxyethylecelluloses, polyquaternium-4 (PQ-4; 1.13-1.27% N) and polyquaternium-10 (PQ-10; 1.88-1.95% N), on the rheological behavior of their dispersions and of the dispersions of their blends with Carbopol 974P (60.9% COOH) in water. Dynamic shear oscillation measurements showed that the rheological behavior of 1 and 2% (w/w) cellulose polymers was mainly viscous. Flow curves of PQ-10 dispersions presented a higher consistency and pseudoplasticity than PQ-4 dispersions, in which the thixotropy was higher. Structural features, such as type and distribution of substituents and molecular weight, explain why they behave different. The presence of 0.00125-0.02% Carbopol in diluted cationic cellulose (0.01-0.08%) dispersions produced an important decrease in viscosity, due to a strong associative process via an electrostatic interaction phenomenon. Similar results were obtained when sodium acetate was added instead of Carbopol. In contrast, in the concentrated range (1% cellulose polymer), the viscous (G") and especially the elastic (G') moduli of the dispersions increased monotonically with Carbopol concentration (0.010-0.125%) and became physical gels, except in the proximity of the neutralization of the ammonium groups (0.07% Carbopol for PQ-4, and 0.1% Carbopol for PQ-10) in which G" and G' decreased. The concentrated dispersions showed pH-sensitivity when the Carbopol added was around or above the neutralization point. In dispersions with this composition, consistency increased dramatically when pH changed from 4.5 to 7.4. This property can open a wide range of applications, especially in the pharmaceutical field to prepare gelling in situ systems.