Mihlbachle Kathleen, Jupke Andreas, Seidel-Morgenstern Andreas, Schmidt-Traub Henner, Guiochon Georges
Department of Chemistry, University of Tennessee, Knoxville 37966-1600, USA.
J Chromatogr A. 2002 Jan 25;944(1-2):3-22. doi: 10.1016/s0021-9673(01)01396-6.
Previous studies of the simulated moving bed (SMB) process assume identical characteristics of all the columns incorporated in a given unit. Due to the practical impossibility to manufacture identical columns, numerical applications of the theory to modeling and optimization use for each of the needed column parameter the average value for the entire column set. In this study, the effects of these simplifications on the actual productivity of the SMB process are evaluated by making exact calculations, i.e., by taking the differences in the porosity values into account. We apply a revised set of separation conditions previously introduced and derived from the equilibrium theory. Earlier theoretical results are compared to experimental results obtained in the study of the enantiomeric separation of Tröger's base on Chiralpak AD. Due to the nonLangmuirian character of the adsorption isotherms of these two compounds on the packing material used, the separation area cannot be determined analytically. As an alternative, a reliable numerical algorithm was used to scan a wider region and to define the separation area. The form of this area depends on the applied porosity values. A UV detector and a laser polarimeter located at one node of the SMB monitor on-line the internal concentration profiles. Excellent agreement between the calculated and the experimentally determined concentration profiles was obtained under nonlinear conditions. The influence of column-to-column variations on the performance of the SMB process was found to be more significant under nonlinear than under linear conditions.
