Witt Matthias, Fuchser Jens, Baykut Gökhan
Bruker Daltonik GmbH, Bremen, Germany.
J Am Soc Mass Spectrom. 2002 Apr;13(4):308-17. doi: 10.1016/S1044-0305(01)00367-1.
Controlled in-source ion-molecule reactions are performed for the first time in an external matrix assisted laser desorption ionization (MALDI) source of a Fourier transform ion cyclotron resonance mass spectrometer. The MALDI source with a hexapole ion guide that was originally designed to incorporate pulsed gas to collisionally cool ions (Baykut, G.; Jertz, R.; Witt, M. Rapid Commun. Mass Spectrom. 2000, 14, 1238-1247) has been modified to allow the study of in-source ion-molecule reactions. Upon laser desorption, a reaction gas was introduced through a second inlet and allowed to interact with the MALDI-generated ions trapped in the hexapole ion guide. Performing ion-molecule reactions in the high pressure range of the ion source prior to analysis in the ion cyclotron resonance (ICR) cell allows to maintain the ultra high vacuum in the cell which is crucial for high mass resolution measurements. In addition, due to the reaction gas pressure in the hexapole product ion formation is much faster than would be otherwise possible in the ICR cell. H/D exchange reactions with different peptides are investigated, as are proton-bound complex formations. A typical experimental sequence would be ion accumulation in the hexapole ion guide from multiple laser shots, addition of cooling gas during ion formation, addition of reaction gas, varied time delays for the ion-molecule reactions, and transmission of the product ions into the ICR cell for mass analysis. In this MALDI source H/D exchange reactions for different protonated peptides are investigated, as well as proton-bound complex formations with the reaction gas triethylamine. Amino acid sequence, structural flexibility and folding state of the peptides can be seen to play a part in the reactivity of such ions.
首次在傅里叶变换离子回旋共振质谱仪的外部基质辅助激光解吸电离(MALDI)源中进行了可控的源内离子 - 分子反应。最初设计用于引入脉冲气体以碰撞冷却离子的带有六极离子导向器的MALDI源(Baykut,G.;Jertz,R.;Witt,M. Rapid Commun. Mass Spectrom. 2000,14,1238 - 1247)已被改进,以允许研究源内离子 - 分子反应。在激光解吸时,反应气体通过第二个入口引入,并使其与捕获在六极离子导向器中的MALDI产生的离子相互作用。在离子源的高压范围内进行离子 - 分子反应,然后在离子回旋共振(ICR)池中进行分析,这有助于保持池中超高真空,这对于高质量分辨率测量至关重要。此外,由于六极中的反应气体压力,产物离子的形成比在ICR池中其他可能的情况要快得多。研究了与不同肽的H/D交换反应以及质子结合复合物的形成。典型的实验序列包括从多次激光脉冲在六极离子导向器中积累离子、在离子形成过程中添加冷却气体、添加反应气体、离子 - 分子反应的不同时间延迟以及将产物离子传输到ICR池中进行质量分析。在这个MALDI源中,研究了不同质子化肽的H/D交换反应以及与反应气体三乙胺形成的质子结合复合物。可以看出肽的氨基酸序列、结构灵活性和折叠状态在这些离子的反应性中起作用。