Akkayan Begüm, Gülmez Turgut
Departmentof Prosthtic Dentistry, Faculty of Dentistry, University of Istanbul, Turkey.
J Prosthet Dent. 2002 Apr;87(4):431-7. doi: 10.1067/mpr.2002.123227.
Very little is known about the resistance to fracture of endodontically treated teeth restored with newly developed esthetic post systems. Purpose. This in vitro study compared the effect of 1 titanium and 3 esthetic post systems on the fracture resistance and fracture patterns of crowned, endodontically treated teeth.
A total of 40 recently extracted human maxillary canines with their crowns removed were endodontically treated. Four groups of 10 specimens were formed. Teeth were restored with titanium, quartz fiber, glass fiber, and zirconia posts and numbered as groups 1, 2, 3, and 4, respectively. All posts were cemented with Single Bond dental adhesive system and dual-polymerizing RelyX ARC adhesive resin cement. All teeth were restored with composite cores, and metal crowns were fabricated and cemented with glass ionomer cement. Each specimen was embedded in acrylic resin and then secured in a universal load-testing machine. A compressive load was applied at a 130-degree angle to the long axis of the tooth until fracture, at a crosshead speed of 1 mm/min. One-way analysis of variance and a Tukey test were used to determine the significance of the failure loads between groups (P<.001). A non-parametric chi(2) test was conducted for evaluation of the mode of failure (P<.001).
The mean failure loads (kg) were 66.95, 91.20, 75.90, and 78.91 for groups 1 to 4, respectively. Teeth restored with quartz fiber posts (group 2) exhibited significantly higher resistance to fracture (P<.001) than the other 3 groups. Teeth restored with glass fiber and zirconia posts (groups 3 and 4) were statistically similar (P>.05). Fractures that would allow repair of the tooth were observed in groups 2 and 3, whereas unrestorable, catastrophic fractures were observed in groups 1 and 4 (P<.001).
Within the limitations of this study, significantly higher failure loads were recorded for root canal treated teeth restored with quartz fiber posts. Fractures that would allow repeated repair were observed in teeth restored with quartz fiber and glass fiber posts.
对于采用新开发的美学桩系统修复的根管治疗牙齿的抗折性能,人们了解甚少。目的:本体外研究比较了1种钛桩和3种美学桩系统对根管治疗后戴冠牙齿的抗折性能及折裂模式的影响。
选取40颗近期拔除的上颌尖牙,去除冠部后进行根管治疗。将其分为4组,每组10个样本。分别用钛桩、石英纤维桩、玻璃纤维桩和氧化锆桩修复牙齿,依次编为第1、2、3、4组。所有桩均用单键牙科粘结系统和双重固化的RelyX ARC粘结树脂水门汀粘结。所有牙齿均用复合树脂核修复,制作金属冠并用玻璃离子水门汀粘结。每个样本嵌入丙烯酸树脂中,然后固定在万能加载试验机上。以1mm/min的十字头速度,在与牙齿长轴呈130度角的方向施加压缩载荷,直至牙齿折断。采用单因素方差分析和Tukey检验确定各组间破坏载荷的显著性(P<0.001)。采用非参数卡方检验评估破坏模式(P<0.001)。
第1至4组的平均破坏载荷(kg)分别为66.95、91.20、75.90和78.91。用石英纤维桩修复的牙齿(第2组)表现出比其他3组显著更高的抗折性(P<0.001)。用玻璃纤维桩和氧化锆桩修复的牙齿(第3组和第4组)在统计学上相似(P>0.05)。在第2组和第3组中观察到可使牙齿修复的折裂,而在第1组和第4组中观察到无法修复的灾难性折裂(P<0.001)。
在本研究的局限性内,用石英纤维桩修复的根管治疗牙齿记录到显著更高的破坏载荷。在用石英纤维桩和玻璃纤维桩修复的牙齿中观察到可重复修复的折裂。