Mayer Gerhard, Kulbe Klaus D, Nidetzky Bernd
Division of Biochemical Engineering, Institute of Food Technology, University of Agricultural Sciences Vienna, Austria.
Appl Biochem Biotechnol. 2002 Spring;98-100:577-89. doi: 10.1385/abab:98-100:1-9:577.
The production of xylitol from D-glucose occurs through a three-step process in which D-arabitol and D-xylulose are formed as the first and second intermediate product, respectively, and both are obtained via microbial bioconversion reactions. Catalytic hydrogenation of D-xylulose yields xylitol; however, it is contaminated with D-arabitol. The aim of this study was to increase the stereoselectivity of the D-xylulose reduction step by using enzymatic catalysis. Recombinant xylitol dehydrogenase from the yeast Galactocandida mastotermitis was employed to catalyze xylitol formation from D-xylulose in an NADH-dependent reaction, and coenzyme regeneration was achieved by means of formate dehydrogenase-catalyzed oxidation of formate into carbon dioxide. The xylitol yield from D-xylulose was close to 100%. Optimal productivity was found for initial coenzyme concentrations of between 0.5 and 0.75 mM. In the presence of 0.30 M (45 g/L) D-xylulose and 2000 U/L of both dehydrogenases, exhaustive substrate turnover was achieved typically in a 4-h reaction time. The enzymes were recovered after the reaction in yields of approx 90% by means of ultrafiltration and could be reused for up to six cycles of D-xylulose reduction. The advantages of incorporating the enzyme-catalyzed step in a process for producing xylitol from D-glucose are discussed, and strategies for downstream processing are proposed by which the observed coenzyme turnover number of approx 600 could be increased significantly.
由D-葡萄糖生产木糖醇是一个三步过程,其中D-阿拉伯糖醇和D-木酮糖分别作为第一和第二中间产物形成,二者均通过微生物生物转化反应获得。D-木酮糖的催化氢化产生木糖醇;然而,它被D-阿拉伯糖醇污染。本研究的目的是通过酶催化提高D-木酮糖还原步骤的立体选择性。来自酵母乳房木霉半乳假丝酵母的重组木糖醇脱氢酶用于在依赖NADH的反应中催化由D-木酮糖形成木糖醇,辅酶再生通过甲酸脱氢酶催化将甲酸氧化为二氧化碳来实现。D-木酮糖的木糖醇产率接近100%。发现初始辅酶浓度在0.5至0.75 mM之间时具有最佳生产力。在存在0.30 M(45 g/L)D-木酮糖和2000 U/L两种脱氢酶的情况下,通常在4小时的反应时间内实现底物的完全转化。反应后通过超滤以约90%的产率回收酶,并且可以重复用于多达六个循环的D-木酮糖还原。讨论了在由D-葡萄糖生产木糖醇的过程中纳入酶催化步骤的优点,并提出了下游加工策略,通过该策略可显著提高观察到的约600的辅酶周转数。