Wang Cheng Yin, Hu Xiao Ya, Jin Gen Di, Leng Zong Zhou
Department of Chemistry and Chemical Engineering, Yangzhou University, 225002, Yangzhou, People's Republic of China.
J Pharm Biomed Anal. 2002 Aug 22;30(1):131-9. doi: 10.1016/s0731-7085(02)00204-2.
Procaine hydrochloride was determined by the differential pulse voltammetry (DPV) using a 6% (m/m) pumice modified carbon paste electrode in 1.25 x 10(-3) mol x l(-1) KH(2)PO(4) and Na(2)HPO(4) buffer solution (pH 6.88, 25 degrees C). The anodic peak potential used was +0.980 V (vs. SCE). A good linear relationship was realized between the anodic peak current and procaine concentration in the range of 9.0 x 10(-7)-2.6 x 10(-5) mol x l(-1) with the detection limit of 5.0 x 10(-8) mol x l(-1). The recovery was 95.2-104.8% with the relative standard deviation of 3.2% (n=10). The pharmaceutical preparations, procaine hydrochloride injection and the urine samples were determined with the desirable results.
采用微分脉冲伏安法(DPV),在6%(m/m)浮石修饰碳糊电极、1.25×10⁻³ mol·L⁻¹ KH₂PO₄ 和Na₂HPO₄ 缓冲溶液(pH 6.88,25℃)条件下测定盐酸普鲁卡因。所用阳极峰电位为+0.980 V(vs. SCE)。在9.0×10⁻⁷ - 2.6×10⁻⁵ mol·L⁻¹范围内,阳极峰电流与盐酸普鲁卡因浓度呈良好的线性关系,检测限为5.0×10⁻⁸ mol·L⁻¹。回收率为95.2% - 104.8%,相对标准偏差为3.2%(n = 10)。该方法用于测定盐酸普鲁卡因注射液等药物制剂及尿液样品,结果满意。