Misaridis Thanassis X, Jensen Jørgen A
Center for Fast Ultrasound Imaging, Orsted-DTU, Technical University of Denmark, Lyngby.
Ultrasonics. 2002 May;40(1-8):593-7. doi: 10.1016/s0041-624x(02)00179-8.
Frame rate in ultrasound imaging can be dramatically increased by using sparse synthetic transmit aperture (STA) beamforming techniques. The two main drawbacks of the method are the low signal-to-noise ratio (SNR) and the motion artifacts, that degrade the image quality. In this paper we propose a spatio-temporal encoding for STA imaging based on simultaneous transmission of two quasi-orthogonal tapered linear FM signals. The excitation signals are an up- and a down-chirp with frequency division and a cross-talk of -55 dB. The received signals are first cross-correlated with the appropriate code, then spatially decoded and finally beamformed for each code, yielding two images per emission. The spatial encoding is a Hadamard encoding previously suggested by Chiao et al. [in: Proceedings of the IEEE Ultrasonics Symposium, 1997, p. 1679]. The Hadamard matrix has half the size of the transmit element groups, due to the orthogonality of the temporal encoded wavefronts. Thus, with this method, the frame rate is doubled compared to previous systems. Another advantage is the utilization of temporal codes which are more robust to attenuation. With the proposed technique it is possible to obtain images dynamically focused in both transmit and receive with only two firings. This reduces the problem of motion artifacts. The method has been tested with extensive simulations using Field II. Resolution and SNR are compared with uncoded STA imaging and conventional phased-array imaging. The range resolution remains the same for coded STA imaging with four emissions and is slightly degraded for STA imaging with two emissions due to the -55 dB cross-talk between the signals. The additional proposed temporal encoding adds more than 15 dB on the SNR gain, yielding a SNR at the same order as in phased-array imaging.
通过使用稀疏合成发射孔径(STA)波束形成技术,超声成像中的帧率可以显著提高。该方法的两个主要缺点是低信噪比(SNR)和运动伪像,这会降低图像质量。在本文中,我们提出了一种基于同时发射两个准正交锥形线性调频信号的STA成像时空编码方法。激励信号是一个上调频和一个下调频信号,具有分频且串扰为-55 dB。接收到的信号首先与适当的编码进行互相关,然后进行空间解码,最后对每个编码进行波束形成,每次发射产生两幅图像。空间编码是Chiao等人之前提出的哈达玛编码[见:《IEEE超声研讨会论文集》,1997年,第1679页]。由于时间编码波前的正交性,哈达玛矩阵的大小是发射元件组大小的一半。因此,与之前的系统相比,使用这种方法帧率提高了一倍。另一个优点是利用了对衰减更具鲁棒性的时间编码。使用所提出的技术,仅通过两次发射就可以获得在发射和接收时都动态聚焦的图像。这减少了运动伪像的问题。该方法已使用Field II进行了广泛的模拟测试。将分辨率和SNR与未编码的STA成像和传统相控阵成像进行了比较。对于四次发射的编码STA成像,距离分辨率保持不变,而对于两次发射的STA成像,由于信号之间-55 dB的串扰,分辨率略有下降。所提出的额外时间编码在SNR增益上增加了超过15 dB,产生的SNR与相控阵成像处于同一量级。