Trimethylpentane-containing passive samplers for predicting time-integrated concentrations of pesticides in water: laboratory and field studies.

A laboratory continuous-flow system delivering known aqueous concentrations of pesticides to passive samplers was used to examine the kinetics of pesticide uptake and release. The passive samplers were constructed of low-density polyethylene membrane bags containing 2.2.4-trimethylpentane solvent (TRIMPS). Both uptake and release experiments were run in triplicate. Each experiment involved four treatments, including a control and three fivefold dilutions of a pesticide mixture that included the usual range of these pesticides as measured in the riverine environment of cotton-growing regions of Australia. The results indicated that for nonpolar pesticides with a log K(ow) > 3.5. uptake was linear over the 42-d exposure time and was independent of the treatment concentration. The half-lives for release of these pesticides from the TRIMPS varied from 26 to 130 d in clean water. The relatively polar pesticides with a log K(ow) < 3.5 had lower uptake rates into the TRIMPS because of their affinity for water. Release of trimethylpentane from the TRIMPS placed in 0.85-mm mesh nylon bags in river water was used as an indicator for chemical diffusion across the aqueous boundary to examine the effect of environmental factors. Most variability in solvent release in the field-deployed TRIMPS across all sites was explained by time of deployment and was not significantly influenced by river flow or water temperature. This suggests that river flow and water temperature may not be important in influencing uptake rates of pesticides into TRIMPS when employed in the field.