Mallouhi Ammar, Felber Stephan, Chemelli Andreas, Dessl Andreas, Auer Alexandra, Schocke Michael, Jaschke Werner R, Waldenberger Peter
Department of Radiology, Innsbruck University Hospital, Anichstrasse 35, 6020 Innsbruck, Austria.
AJR Am J Roentgenol. 2003 Jan;180(1):55-64. doi: 10.2214/ajr.180.1.1800055.
The purpose of this study was to compare volume rendering and maximum intensity projection as postprocessing techniques of MR angiography in the detection and characterization of intracranial aneurysms.
Three-dimensional time-of-flight MR angiography studies performed in 82 patients were retrospectively evaluated by two independent reviewers who were unaware of digital subtraction angiography findings, the standard of reference. Panoramic maximum-intensity-projection and volume-rendered angiograms were produced from each data set to investigate the presence of underlying aneurysms. Each detected aneurysm was then interactively evaluated with subvolume maximum-intensity-projection and targeted volume-rendering algorithms to evaluate aneurysm morphology and size. Aneurysm detection and characterization were evaluated by means of the receiver operating characteristic analysis, and aneurysm size was evaluated using the limits-of-agreement method. Image quality, aneurysm neck depiction, and vascular delineation were also compared between maximum-intensity-projection and volume-rendered images. The time required for the generation and interpretation of maximum-intensity-projection and volume-rendered images was assessed.
Volume rendering tended to improve the diagnostic confidence (A(z) [area under the receiver operating characteristic curve] = 0.95 vs A(z) = 0.90 for maximum intensity projection) and yielded a considerable improvement in sensitivity (89% vs 71% for maximum intensity projection), particularly in the detection of small cerebral aneurysms. Regarding aneurysm morphology, volume rendering performed significantly better than maximum intensity projection in lobulation detection (p < 0.001) and slightly better in neck categorization (p > 0.238). Limits-of-agreement analysis showed a trend toward improved assessment of the aneurysm size by volume rendering (-0.31 +/- 1.62 mm vs -1.27 +/- 2.84 mm by maximum intensity projection). Overall image quality and vascular delineation of involved vessels on volume-rendered images were rated better than that obtained by maximum intensity projections (p < or = 0.007 and p < or = 0.001, respectively). Evaluation of time-of-flight MR angiography data sets was significantly facilitated with volume rendering (p < 0.001).
The volume-rendering technique facilitates the evaluation of cerebral time-of-flight MR angiography data sets and allows better detection and more reliable characterization of intracranial aneurysms than does maximum intensity projection.
本研究旨在比较容积再现和最大密度投影作为磁共振血管造影的后处理技术在颅内动脉瘤检测和特征描述方面的效果。
对82例患者进行的三维时间飞跃磁共振血管造影研究由两名独立的审阅者进行回顾性评估,这两名审阅者不知道数字减影血管造影的结果,而数字减影血管造影结果是参考标准。从每个数据集生成全景最大密度投影和容积再现血管造影,以调查潜在动脉瘤的存在。然后,使用子容积最大密度投影和靶向容积再现算法对每个检测到的动脉瘤进行交互式评估,以评估动脉瘤的形态和大小。通过接受者操作特征分析评估动脉瘤的检测和特征描述,并使用一致性界限方法评估动脉瘤大小。还比较了最大密度投影图像和容积再现图像之间的图像质量、动脉瘤颈部描绘和血管轮廓。评估了生成和解释最大密度投影图像和容积再现图像所需的时间。
容积再现倾向于提高诊断置信度(接受者操作特征曲线下面积A(z)=0.95,而最大密度投影的A(z)=0.90),并在敏感性方面有显著提高(最大密度投影为71%,容积再现为89%),特别是在检测小型脑动脉瘤方面。关于动脉瘤形态,在分叶检测方面,容积再现明显优于最大密度投影(p<0.001),在颈部分类方面略优于最大密度投影(p>0.238)。一致性界限分析显示,容积再现对动脉瘤大小的评估有改善趋势(-0.31±1.62mm,而最大密度投影为-1.27±2.84mm)。容积再现图像上受累血管的整体图像质量和血管轮廓评分优于最大密度投影图像(分别为p≤0.007和p≤0.001)。容积再现显著促进了对时间飞跃磁共振血管造影数据集的评估(p<0.001)。
与最大密度投影相比,容积再现技术有助于评估脑部时间飞跃磁共振血管造影数据集,并能更好地检测颅内动脉瘤,且对其特征描述更可靠。