Suppr超能文献

用于生物医学用途的硅烷化羟丙基甲基纤维素的合成及一般性质

Synthesis and general properties of silated-hydroxypropyl methylcellulose in prospect of biomedical use.

作者信息

Bourges Xavier, Weiss Pierre, Daculsi Guy, Legeay Gilbert

机构信息

INSERM E 99-03, Laboratoire des Tissus Calcifiés, Faculté de Chirurgie Dentaire, 1 place Alexis Ricordeau, 44042 Nantes, France.

出版信息

Adv Colloid Interface Sci. 2002 Dec 2;99(3):215-28. doi: 10.1016/s0001-8686(02)00035-0.

Abstract

Synthesis of grafting silane on a hydro soluble cellulose ether (HPMC) was described. In alkaline medium, this derivate is under gel form. With a decrease of the pH, a self-hardening occurs due to the silanol condensation. For potential biomedical use, we described the silated-HPMC synthesis, the gel behavior after steam sterilization and the parameters of the silanol condensation i.e. pH, silane percentage and temperature. Minimum kinetic of the condensation was observed for pH between 5.5 and 6.5. So temperature catalyzed the reaction and the self-hardening speed was increased by silane percentage.

摘要

描述了在水溶性纤维素醚(羟丙基甲基纤维素)上接枝硅烷的合成。在碱性介质中,该衍生物呈凝胶形式。随着pH值降低,由于硅醇缩合会发生自硬化。对于潜在的生物医学用途,我们描述了硅烷化羟丙基甲基纤维素的合成、蒸汽灭菌后的凝胶行为以及硅醇缩合的参数,即pH值、硅烷百分比和温度。在pH值为5.5至6.5之间观察到缩合的最小动力学。因此温度催化了反应,并且自硬化速度随硅烷百分比增加。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验