Suppr超能文献

镍催化1,3 - 丁二烯的环三聚反应:关于选择性起源的全面密度泛函研究

Ni0-catalyzed cyclotrimerization of 1,3-butadiene: a comprehensive density functional investigation on the origin of the selectivity.

作者信息

Tobisch Sven

机构信息

Institut für Anorganische Chemie der Martin-Luther-Universität Halle-Wittenberg Fachbereich Chemie, Kurt-Mothes-Strasse 2 06210 Halle, Germany.

出版信息

Chemistry. 2003 Mar 3;9(5):1217-32. doi: 10.1002/chem.200390139.

Abstract

A comprehensive theoretical investigation of the mechanism for the Ni(0)-catalyzed cyclotrimerization of 1,3-butadiene by the [Ni(0)(eta(2)-butadiene)(3)] active catalyst complex is presented by employing a gradient-corrected DFT method. All critical elementary processes of the catalytic cycle have been scrutinized, namely, oxidative coupling of two butadienes, butadiene insertion into the allyl-Ni(II) bond, allylic isomerization in both octadienediyl-Ni(II) and dodecatrienediyl-Ni(II) species, and reductive elimination under ring closure. For each of these elementary steps several conceivable routes and also the different stereochemical pathways have been probed. The favorable route for oxidative coupling start from the prevalent [Ni(0)(eta(2)-butadiene)(3)] form of the active catalyst through coupling between the terminal non-coordinated carbon atoms of two reactive eta(2)-butadiene moieties; this is assisted by an ancillary butadiene in eta(2)-mode. The initial eta(3),eta(1)(C(1))-octadienediyl-Ni(II) product is the active precursor for subsequent butadiene insertion, which preferably takes place into the eta(3)-allyl-Ni(II) bond. The insertion is driven by a strong thermodynamic force. Therefore, the dodecatrienediyl-Ni(II) products, with the most favorable bis(eta(3)-allyl),Delta-trans isomers in particular, represent a thermodynamic sink. Commencing from a preestablished equilibrium between the various bis(eta(3)-allyl),Delta-trans forms of the [Ni(II)(dodecatrienediyl)] complex, the major cyclotrimer products, namely all-t-CDT, c,c,t-CDT and c,t,t-CDT, are formed along competing paths by reductive elimination under ring closure, which is shown to be rate-controlling. The all-c-CDT-generating path is completely precluded by both thermodynamic and kinetic factors, giving rise to negligibly populated bis(eta(3)-allyl),Delta-cis precursor isomers. The regulation of the selectivity of the CDT formation as well as the competition between the two reaction channels for generation of C(12)- and C(8)-cycloolefins is elucidated.

摘要

采用梯度校正密度泛函理论(DFT)方法,对[Ni(0)(η²-丁二烯)₃]活性催化剂配合物催化1,3-丁二烯环三聚反应的机理进行了全面的理论研究。对催化循环中的所有关键基元过程进行了详细考察,包括两个丁二烯的氧化偶联、丁二烯插入烯丙基-Ni(II)键、八碳二烯基-Ni(II)和十二碳三烯基-Ni(II)物种中的烯丙基异构化以及闭环下的还原消除。对于这些基元步骤中的每一个,都探索了几种可能的途径以及不同的立体化学途径。氧化偶联的有利途径是从活性催化剂普遍存在的[Ni(0)(η²-丁二烯)₃]形式开始,通过两个反应性η²-丁二烯部分的末端非配位碳原子之间的偶联;这由处于η²模式的辅助丁二烯协助。最初的η³,η¹(C₁)-八碳二烯基-Ni(II)产物是后续丁二烯插入的活性前体,丁二烯优选插入到η³-烯丙基-Ni(II)键中。插入由强大的热力学驱动力驱动。因此,十二碳三烯基-Ni(II)产物,特别是具有最有利的双(η³-烯丙基)、Δ-反式异构体,代表了一个热力学阱。从[Ni(II)(十二碳三烯基)]配合物的各种双(η³-烯丙基)、Δ-反式形式之间预先建立的平衡开始,主要的环三聚产物,即全反式环十二碳三烯(all-t-CDT)、顺,反,反式环十二碳三烯(c,c,t-CDT)和顺,反,顺式环十二碳三烯(c,t,t-CDT),通过闭环下的还原消除沿着竞争路径形成,这被证明是速率控制步骤。生成全顺式环十二碳三烯(all-c-CDT)的路径在热力学和动力学因素的作用下完全被排除,导致双(η³-烯丙基)、Δ-顺式前体异构体的丰度可以忽略不计。阐明了环十二碳三烯形成选择性的调控以及生成C₁₂-和C₈-环烯烃的两个反应通道之间的竞争。

相似文献

9
Ni-, Pd-, or Pt-catalyzed ethylene dimerization: a mechanistic description of the catalytic cycle and the active species.
Org Biomol Chem. 2010 Mar 7;8(5):1040-51. doi: 10.1039/b921492e. Epub 2010 Jan 11.

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验