Tashman Scott, Anderst William
Bone and Joint Center, Henry Ford Hospital, 2799 W. Grand Blvd., Detroit, MI 48202, USA.
J Biomech Eng. 2003 Apr;125(2):238-45. doi: 10.1115/1.1559896.
Dynamic assessment of three-dimensional (3D) skeletal kinematics is essential for understanding normal joint function as well as the effects of injury or disease. This paper presents a novel technique for measuring in-vivo skeletal kinematics that combines data collected from high-speed biplane radiography and static computed tomography (CT). The goals of the present study were to demonstrate that highly precise measurements can be obtained during dynamic movement studies employing high frame-rate biplane video-radiography, to develop a method for expressing joint kinematics in an anatomically relevant coordinate system and to demonstrate the application of this technique by calculating canine tibio-femoral kinematics during dynamic motion. The method consists of four components: the generation and acquisition of high frame rate biplane radiographs, identification and 3D tracking of implanted bone markers, CT-based coordinate system determination, and kinematic analysis routines for determining joint motion in anatomically based coordinates. Results from dynamic tracking of markers inserted in a phantom object showed the system bias was insignificant (-0.02 mm). The average precision in tracking implanted markers in-vivo was 0.064 mm for the distance between markers and 0.31 degree for the angles between markers. Across-trial standard deviations for tibio-femoral translations were similar for all three motion directions, averaging 0.14 mm (range 0.08 to 0.20 mm). Variability in tibio-femoral rotations was more dependent on rotation axis, with across-trial standard deviations averaging 1.71 degrees for flexion/extension, 0.90 degree for internal/external rotation, and 0.40 degree for varus/valgus rotation. Advantages of this technique over traditional motion analysis methods include the elimination of skin motion artifacts, improved tracking precision and the ability to present results in a consistent anatomical reference frame.
动态评估三维(3D)骨骼运动学对于理解正常关节功能以及损伤或疾病的影响至关重要。本文提出了一种测量体内骨骼运动学的新技术,该技术结合了从高速双平面X射线摄影和静态计算机断层扫描(CT)收集的数据。本研究的目的是证明在采用高帧率双平面视频X射线摄影的动态运动研究中可以获得高精度测量结果,开发一种在解剖学相关坐标系中表达关节运动学的方法,并通过计算动态运动过程中的犬胫股关节运动学来证明该技术的应用。该方法由四个部分组成:高帧率双平面X射线照片的生成与采集、植入骨标记物的识别与三维跟踪、基于CT的坐标系确定以及用于在基于解剖学的坐标系中确定关节运动的运动学分析程序。对插入模拟物体中的标记物进行动态跟踪的结果表明,系统偏差不显著(-0.02毫米)。体内跟踪植入标记物时,标记物之间距离的平均精度为0.064毫米,标记物之间角度的平均精度为0.31度。胫股平移在所有三个运动方向上的试验间标准差相似,平均为0.14毫米(范围为0.08至0.20毫米)。胫股旋转的变异性更多地取决于旋转轴,试验间标准差在屈伸方向上平均为1.71度,内外旋转方向上平均为0.90度,内翻/外翻旋转方向上平均为0.40度。该技术相对于传统运动分析方法的优点包括消除皮肤运动伪影、提高跟踪精度以及能够在一致的解剖学参考系中呈现结果。