Schmidt Andrea G, Wartewig Siegfried, Picker Katharina M
Institute of Pharmaceutical Technology and Biopharmacy, Martin-Luther-University Halle-Wittenberg, Halle, Germany.
Eur J Pharm Biopharm. 2003 Jul;56(1):101-10. doi: 10.1016/s0939-6411(03)00037-7.
Carrageenans were analysed in mixture with polymorphic drugs to test their potential for minimising polymorphic or pseudopolymorphic transitions, which are induced by the tableting process. The kappa-carrageenans Gelcarin GP-812 NF and Gelcarin GP-911 NF and the iota-carrageenan Gelcarin GP-379 NF were tested in comparison to the well-known tableting excipients microcrystalline cellulose (MCC), hydroxypropyl methylcellulose (HPMC), and dicalcium phosphate dihydrate (DCPD). Amorphous indomethacin was chosen as model drug since its well-known recrystallisation behaviour can be mechanically stimulated. Further on, theophylline monohydrate was used. Its dehydration is induced by tableting. Pure materials and mixtures containing 20% (w/w) drug were compressed up to different maximum relative densities. The data obtained during tableting were analysed by three-dimensional (3D) modelling. Afterwards tablets were broken and examined by Fourier transform Raman spectroscopy in order to determine the degree of transformation inside the tablet. For quantitative interpretation, the intensities of representative bands were used. Thermal analysis was used additionally. Using 3D modelling a decrease of plastic deformation can be noticed in the order HPMC>MCC>carrageenans, whereas DCPD represents an exception because of brittle fracture. Best hindrance of polymorphic transformation showed the carrageenans, the hindrance was slightly worse for HPMC. MCC and DCPD could not hinder transformation. A complete protection of the amorphous form could not be achieved. For theophylline monohydrate, the results were similar.
对角叉菜胶与多晶型药物的混合物进行了分析,以测试其在最小化由压片过程引起的多晶型或假多晶型转变方面的潜力。将κ-角叉菜胶Gelcarin GP - 812 NF和Gelcarin GP - 911 NF以及ι-角叉菜胶Gelcarin GP - 379 NF与著名的压片辅料微晶纤维素(MCC)、羟丙基甲基纤维素(HPMC)和二水磷酸氢钙(DCPD)进行了比较测试。选择无定形吲哚美辛作为模型药物,因为其众所周知的重结晶行为可以通过机械方式激发。此外,还使用了一水合茶碱。其脱水是由压片引起的。将纯材料和含有20%(w/w)药物的混合物压制成不同的最大相对密度。通过三维(3D)建模分析压片过程中获得的数据。之后将片剂破碎并通过傅里叶变换拉曼光谱进行检查,以确定片剂内部的转变程度。为了进行定量解释,使用了代表性谱带的强度。另外还进行了热分析。使用3D建模可以注意到塑性变形的降低顺序为HPMC>MCC>角叉菜胶,而DCPD由于脆性断裂是个例外。角叉菜胶对多晶型转变的阻碍作用最佳,HPMC的阻碍作用稍差。MCC和DCPD无法阻碍转变。无法实现对无定形形式的完全保护。对于一水合茶碱,结果类似。