Peterson Jill, Dechow Paul C
Department of Public Health, Baylor College of Dentistry, Texas A & M University System Health Science Center, Dallas, Texas 75246, USA.
Anat Rec A Discov Mol Cell Evol Biol. 2003 Sep;274(1):785-97. doi: 10.1002/ar.a.10096.
The material properties of cortical bone from the diaphyses of long bones (e.g., the femur and tibia) vary by direction, such that bone is stiffer and stronger along its long axis. This configuration improves the abilities of these structures to resist axial compressive loads coupled with bending. As in long bones, cortical bone from the cranial vault is subject to mechanical loads from various orofacial functions and the contraction of attached muscles. However, experimental studies suggest that the resulting bone strains are at least an order of magnitude smaller than those found in the midshafts of the femur or tibia. The characteristics of the three-dimensional elastic properties of cortical bone are largely unexplored in regions of low bone strain, including the cranial vault, in which little is known regarding cortical structure and function. In the present study we examined variations in the cortical microstructure and material properties of the bone of the human cranial vault, including the parietal, frontal, temporal, and occipital bones. A facial bone, the zygoma, was also included to contrast the properties of the cranial vault with another craniofacial intramembranous bone that experiences larger strains. Cortical specimens from the outer cortical plate of the cranial vault were removed from 15 frozen human crania. We measured cortical thicknesses and densities, and determined the primary direction of stiffness within the bone specimens prior to ultrasonic testing to determine their elastic properties. There were statistically significant differences in elastic properties between bones and, in some cases, sites within bones, which for most variables were clustered by bone or region. In striking contrast to this pattern, elastic moduli in the direction of primary stiffness were larger in cortical regions underlying muscle attachments than in regions without muscle attachments. Few sites in the cranial vault or zygoma showed a consistent orientation of the material axes among individuals, although specimens from many regions had directional differences similar to those in cortical bone from the mandible, femur, or tibia.
长骨干(如股骨和胫骨)皮质骨的材料特性因方向而异,使得骨骼沿其长轴更坚硬、更强壮。这种结构提高了这些结构抵抗轴向压缩载荷和弯曲的能力。与长骨一样,颅顶的皮质骨也受到各种口面部功能和附着肌肉收缩产生的机械载荷。然而,实验研究表明,由此产生的骨应变至少比在股骨或胫骨中轴处发现的应变小一个数量级。在低骨应变区域,包括颅顶,皮质骨三维弹性特性的特征在很大程度上尚未得到探索,在这些区域,关于皮质结构和功能知之甚少。在本研究中,我们检查了人类颅顶骨(包括顶骨、额骨、颞骨和枕骨)皮质微观结构和材料特性的变化。还纳入了一块面骨——颧骨,以将颅顶骨的特性与另一块经历更大应变的颅面膜内骨进行对比。从15个冷冻的人类颅骨中取出颅顶外皮质板的皮质标本。在进行超声测试以确定其弹性特性之前,我们测量了皮质厚度和密度,并确定了骨标本内刚度的主要方向。不同骨骼之间以及在某些情况下同一骨骼内不同部位的弹性特性存在统计学上的显著差异,对于大多数变量,这些差异按骨骼或区域聚类。与此模式形成鲜明对比的是,在肌肉附着下方的皮质区域,主刚度方向的弹性模量比没有肌肉附着的区域更大。尽管许多区域的标本具有与下颌骨、股骨或胫骨皮质骨相似的方向差异,但颅顶或颧骨中很少有部位在个体之间表现出材料轴的一致取向。