Reichel E, Paltauf G, Schmidt-Kloiber H, Groke K
Institut für Experimentalphysik, Karl Franzens-Universität Graz, Austria.
Lasers Surg Med. 1992;12(2):204-9. doi: 10.1002/lsm.1900120215.
For the laser-induced shockwave lithotripsy (LISL) the laser-pulses of a Q-switched Nd:YAG laser produce an optical breakdown in the irrigation liquid surrounding the urinary stone. Subsequently high-pressure shockwaves are emitted causing stone fragmentation. Since the LISL is an endoscopic technique, problems arise from the transmission of the laser pulses through optical fibers. The intensity threshold for an optical breakdown in commonly used saline solution amounts to 21 GW/cm2, in optical silica fibers, to about 3 GW/cm2. Therefore bare fibers cannot be used without being destroyed by a breakdown. So we have developed an irrigation liquid by adding small quantities of metal ions to saline solution to lower the threshold intensity. The most suitable ion was Fe3+ in a concentration of 0.02 mmol/l, which shows a lowering to 5 GW/cm2. In combination with a spherically shaped fiber exit the intensities that have to be transmitted are below the threshold of the fiber material. Using this irrigation liquid the overall reliability of the method could be significantly increased and several stone fragmentations can be performed with a single optical fiber.
对于激光诱导冲击波碎石术(LISL),调Q Nd:YAG激光的激光脉冲在尿路结石周围的冲洗液中产生光击穿。随后会发射高压冲击波,导致结石破碎。由于LISL是一种内窥镜技术,激光脉冲通过光纤传输会产生问题。常用盐溶液中的光击穿强度阈值为21 GW/cm²,在光学石英光纤中约为3 GW/cm²。因此,裸光纤在不被击穿破坏的情况下无法使用。所以我们通过向盐溶液中添加少量金属离子来开发一种冲洗液,以降低阈值强度。最合适的离子是浓度为0.02 mmol/l的Fe³⁺,其将阈值强度降低到了5 GW/cm²。结合球形光纤出口,需要传输的强度低于光纤材料的阈值。使用这种冲洗液,该方法的整体可靠性可以显著提高,并且一根光纤可以进行多次结石破碎。