Development of a totally implantable artificial heart.

The first generation of an integrated, totally implantable electrohydraulic total artificial heart was designed for long-term cardiac replacement. The system consists of an elliptical blood pump with an interatrial shunt, Medtronic-Hall 27 mm and 25 mm inflow and outflow valves, respectively, an energy converter consisting of an axial-flow, hydraulic pump driven by a brushless DC motor, and an electronics system with transcutaneous energy transmission and telemetry. Energy is supplied by internal nickel-cadmium rechargeable batteries that supply power for 20 min and external silver-zinc batteries that are designed to supply energy to run the system for 5 hr. The blood pump consists of a single layer diaphragm cast from Biolon, with joined right and left ventricles sharing a common base. The dynamic stroke volume is 84 ml, and maximum cardiac output is 9.2 L/min at a heart rate of 110 beats/min on the mock circulation. A 4.3 mm diameter interatrial shunt is used to balance the volumetrically coupled ventricles. The energy converter pumps hydraulic fluid alternately between ventricles, with controlled, active filling in one ventricle during the systolic phase of the other ventricle. Internal or external controllers adjust the heart rate and motor speed to maintain normal atrial filling pressures and full stroke. Electromagnetic induction is used to transfer energy through the skin and a bidirectional infrared data link incorporated within the transcutaneous energy transmission coils is used to transmit information. The entire system is being assembled and refined for long-term animal implant studies.