Longest P Worth, Kleinstreuer Clement, Archie Joseph P
Department of Mechanical and Aerospace Engineering, North Carolina State University, 2309 Woodrow Drive, Raleigh, NC 27609, USA.
J Vasc Surg. 2003 Dec;38(6):1353-62. doi: 10.1016/s0741-5214(03)00950-9.
Studies of animal and human below-knee anastomoses with Miller cuffs indicate that improved graft patency results from redistribution of intimal hyperplasia away from areas critical to flow delivery, such as the arterial toe. We hypothesize that particle hemodynamic conditions are a biophysical mechanism potentially responsible for the clinically observed shift in intimal hyperplasia localization associated with better patency of the Miller configuration.
Computational fluid dynamics analysis of vortical flow patterns, wall shear stress fields, and potential for platelet interaction with the vascular surface was performed for realistic three-dimensional conventional and Miller cuff distal end-to-side anastomoses. Sites of significant platelet-wall interaction, including elevated near-wall particle concentrations and stasis, were identified with a validated near-wall residence time model, which includes shear stress-based factors for particle activation and surface reactivity.
Particle hemodynamics largely coincide with the observed redistribution of intimal hyperplasia away from the critical arterial toe region. Detrimental changes in wall shear stress vector magnitude and direction are significantly reduced along the arterial suture line of the Miller cuff, largely as a result of increased anastomotic area available for flow redirection. However, because of strong particle-wall interaction, resulting high near-wall residence time contours indicate significant intimal hyperplasia along the graft-vein suture line and in the vicinity of the arterial heel.
While a number of interacting mechanical, biophysical, and technical factors may be responsible for improved Miller cuff patency, our results imply that particle hemodynamics conditions engendered by Miller cuff geometry provide a mechanism that may account for redistribution of intimal hyperplasia. In particular, it appears that a focal region of significant particle-wall interaction at the arterial toe is substantially reduced with the Miller cuff configuration.
对使用米勒袖套进行动物和人体膝下吻合术的研究表明,内膜增生从对血流输送至关重要的区域(如动脉趾部)重新分布,从而改善了移植物通畅率。我们假设颗粒血流动力学条件是一种生物物理机制,可能是临床上观察到的与米勒构型更好的通畅率相关的内膜增生定位变化的原因。
对逼真的三维传统和米勒袖套远端端侧吻合术进行了涡流模式、壁面剪应力场以及血小板与血管表面相互作用可能性的计算流体动力学分析。使用经过验证的近壁停留时间模型确定了显著的血小板 - 壁相互作用部位,包括近壁颗粒浓度升高和血流停滞部位,该模型包括基于剪应力的颗粒活化和表面反应性因素。
颗粒血流动力学在很大程度上与观察到的内膜增生从关键动脉趾部区域的重新分布相吻合。沿着米勒袖套的动脉缝合线,壁面剪应力矢量大小和方向的有害变化显著减少,这主要是由于可用于血流重新定向的吻合面积增加。然而,由于强烈的颗粒 - 壁相互作用,由此产生的高近壁停留时间等高线表明沿移植静脉缝合线和动脉足跟附近有显著的内膜增生。
虽然许多相互作用的机械、生物物理和技术因素可能是米勒袖套通畅率提高的原因,但我们的结果表明,米勒袖套几何形状产生的颗粒血流动力学条件提供了一种机制,可能解释内膜增生的重新分布。特别是,似乎米勒袖套构型使动脉趾部显著颗粒 - 壁相互作用的焦点区域大幅减少。