Suppr超能文献

6-和7-甲基-8-取代蝶呤的制备方法:第1部分。反应条件对异构体分布的影响及一种异构体分离的新方法。

Approaches to the preparation of 6- and 7-methyl-8-substituted pterins: Part 1. The effect of reaction conditions on isomer distribution and a novel approach to isomer separation.

作者信息

Ivery M T, Gready J E

机构信息

Department of Biochemistry, University of Sydney, Australia.

出版信息

Biol Chem Hoppe Seyler. 1992 Nov;373(11):1125-37. doi: 10.1515/bchm3.1992.373.2.1125.

Abstract

A new approach to the preparation of 6- and 7-methyl-8-alkylpterins is reported. This procedure relies primarily on the separation of the isomers due to their different propensities to form adducts with hydrogensulfite. The primary synthesis of 6-methyl-8-propylpterin was achieved by the condensation of 2,5-diamino-6-(propylamino)pyrimidin-4(3H)- one with pyruvic aldehyde in the presence of NaHSO3 at pH 4. This results in a solid product which was found to be > 98% pure 6-isomer in the form of the HSO3- adduct. Further treatment by a simple procedure gave the final product as the pterin hydrochloride greater than 99.5% isomer pure. The 7-methyl isomer was obtained from the filtrate of the primary synthesis by a cation exchange chromatographic procedure, again exploiting the different propensities of the two isomers to form adduct. The effect of reaction conditions and the nature of the 8-substituent on the proportions of the isomeric products produced by the above condensation reaction was investigated by a series of small scale syntheses. It was found that the proportion of the two isomeric products was dependent on the size of the 8-substituent and, to a lesser extent, the pH of the reaction mixture. For large 8-substituents such as n-propyl, isopropyl and 2-hydroxyethyl, 6-methyl isomer was the predominant product under all conditions. The presence of HSO3 [symbol: see text] did not generate any significant regioselective effect toward further formation of 6-isomer but had either negligible effect on the product distribution or increased the amount of 7-isomer formed. For the small methyl 8-substituent, the major product in the absence of HSO3 [symbol: see text] was found to be 7-isomer at all pH values. However, in the presence of HSO3 [symbol: see text] the major product became the 6-isomer. A 1H-NMR study of the nature of pyruvic aldehyde in acidic water solution is reported which shows that pyruvic aldehyde exists primarily as the monohydrated geminal ketodiol with a lesser proportion of the bishydrated vicinal diol. No free aldehyde was observed by 1H-NMR. The implications of these findings and the product distribution experiments are discussed in relation to the mechanism of the reaction and the role of HSO3 [symbol: see text] within this mechanism.

摘要

报道了一种制备6-和7-甲基-8-烷基蝶呤的新方法。该方法主要依赖于异构体的分离,因为它们与亚硫酸氢盐形成加合物的倾向不同。6-甲基-8-丙基蝶呤的初步合成是通过在pH为4的NaHSO3存在下,使2,5-二氨基-6-(丙氨基)嘧啶-4(3H)-酮与丙酮酸醛缩合实现的。这产生了一种固体产物,发现其为>98%纯的6-异构体,呈HSO3-加合物形式。通过简单的步骤进一步处理得到最终产物为盐酸蝶呤,异构体纯度大于99.5%。7-甲基异构体是通过阳离子交换色谱法从初步合成的滤液中获得的,同样利用了两种异构体形成加合物的不同倾向。通过一系列小规模合成研究了反应条件和8-取代基的性质对上述缩合反应产生的异构体产物比例的影响。发现两种异构体产物的比例取决于8-取代基的大小,并且在较小程度上取决于反应混合物的pH值。对于大的8-取代基,如正丙基、异丙基和2-羟乙基,在所有条件下6-甲基异构体都是主要产物。HSO3[符号:见原文]的存在对6-异构体的进一步形成没有产生任何显著的区域选择性影响,但对产物分布的影响可以忽略不计或增加了7-异构体的形成量。对于小的8-甲基取代基,发现在没有HSO3[符号:见原文]的情况下,在所有pH值下主要产物都是7-异构体。然而,在HSO3[符号:见原文]存在下,主要产物变成了6-异构体。报道了对丙酮酸醛在酸性水溶液中的性质进行的1H-NMR研究,结果表明丙酮酸醛主要以一水合偕二醇酮的形式存在,双水合邻二醇的比例较小。1H-NMR未观察到游离醛。结合反应机理以及HSO3[符号:见原文]在该机理中的作用,讨论了这些发现和产物分布实验的意义。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验