Suppr超能文献

具有并行成像的高空间分辨率全身磁共振血管造影:初步经验。

High spatial resolution whole-body MR angiography featuring parallel imaging: initial experience.

作者信息

Quick H H, Vogt F M, Maderwald S, Herborn C U, Bosk S, Göhde S, Debatin J F, Ladd M E

机构信息

Institut für Diagnostische und Interventionelle Radiologie, Universitätsklinikum Essen, Essen, Germany.

出版信息

Rofo. 2004 Feb;176(2):163-9. doi: 10.1055/s-2004-817623.

Abstract

PURPOSE

To combine whole-body multi-station three-dimensional contrast enhanced magnetic resonance angiography (3D CE MRA) using a self-developed rolling table platform with parallel imaging strategies (PAT) in order to increase the spatial resolution of the 3D MRA data sets.

MATERIALS AND METHODS

Whole-body multi-station MRA was performed with a rolling table platform (AngioSURF) on 5 volunteers in two imaging series: 1) standard imaging protocol, 2) modified high-resolution protocol employing PAT using the generalized autocalibrating partially parallel acquisitions (GRAPPA) algorithm with an acceleration factor of 3. For an intra-individual comparison of the two MR examinations, the arterial vasculature was divided into 30 segments. Signal-to-noise ratios (SNR) and contrast-to-noise ratios (CNR) were calculated for all 30 arterial segments of each subject. Vessel segment depiction was qualitatively assessed applying a 5-point scale to each of the segments. Image reconstruction times were recorded for the standard as well as the PAT protocol.

RESULTS

Compared to the standard protocol, PAT allowed for increased spatial resolution through a 3-fold reduction in mean voxel size for each of the 5 stations. Mean SNR and CNR values over all specified vessel segments decreased by a factor of 1.58 and 1.56, respectively. Despite the reduced SNR and CNR, the depiction of all specified vessel segments increased in PAT images, reflecting the increased spatial resolution. Qualitative comparison of standard and PAT images showed an increase in vessel segment conspicuity with more detailed depiction of intramuscular arterial branches in all volunteers. The time for image data reconstruction of all 5 stations was significantly increased from about 10 minutes to 40 minutes when using the PAT acquisition.

CONCLUSION

The implementation of PAT into the concept of whole-body MRA enabled to increase the spatial resolution in all examined territories, which resulted in more detailed MR angiograms.

摘要

目的

将使用自行研发的滚动平台的全身多站三维对比增强磁共振血管造影(3D CE MRA)与并行成像策略(PAT)相结合,以提高3D MRA数据集的空间分辨率。

材料与方法

使用滚动平台(AngioSURF)对5名志愿者进行全身多站MRA,分为两个成像序列:1)标准成像方案;2)采用PAT的改良高分辨率方案,使用广义自校准部分并行采集(GRAPPA)算法,加速因子为3。为了对两次MR检查进行个体内比较,将动脉血管系统分为30个节段。计算每个受试者所有30个动脉节段的信噪比(SNR)和对比噪声比(CNR)。对每个节段应用5分制进行血管节段描绘的定性评估。记录标准方案和PAT方案的图像重建时间。

结果

与标准方案相比,PAT通过将5个站点中每个站点的平均体素大小缩小3倍,提高了空间分辨率。所有指定血管节段的平均SNR和CNR值分别降低了1.58倍和1.56倍。尽管SNR和CNR降低,但PAT图像中所有指定血管节段的描绘有所增加,反映了空间分辨率的提高。标准图像和PAT图像的定性比较显示,所有志愿者的血管节段清晰度增加,肌肉内动脉分支的描绘更详细。使用PAT采集时,所有5个站点的图像数据重建时间从约10分钟显著增加到40分钟。

结论

将PAT应用于全身MRA概念能够提高所有检查区域的空间分辨率,从而获得更详细的磁共振血管造影。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验