Impellitteri Christopher A
US Environmental Protection Agency, National Risk Management Research Laboratory, 26 West Martin Luther King Drive, Cincinnati, OH 45268, USA.
Water Res. 2004 Mar;38(5):1207-14. doi: 10.1016/j.watres.2003.11.023.
Anion exchange resins (AERs) separate As(V) and As(III) in solution by retaining As(V) and allowing As(III) to pass through. Anion exchange resins offer several advantages including cost, portability, and ease of use. The use of AERs for the instantaneous speciation of As minimizes the effects of preservatives on As species analysis. The aims of this study were to: (1) Examine the effects of pH and competing anions on the efficacy of solid phase extraction cartridges (SPECs) for speciation of As in a 0.01 molL(-1) NaNO(3) background electrolyte. (2) Identify optimal conditions (e.g. flow rates) for As speciation. (3) Calculate method detection limits (MDLs) from spiked background electrolyte and percent recoveries of As species from spiked extracts of mine wastes. The most effective SPEC retained As(V) through a range of environmentally relevant pH values (4-8). The mass loading capacity for As(V) was reduced in the background electrolyte (0.006 mg) compared with As(V) in deionized H(2)O (0.75 mg). Some retention (10-20%) of As(III) occurred on pre-wetted cartridges. Approximately 98% of spiked As(III) passed through dry cartridges. The recommended flow rate (0.5 mL min(-1)) was increased to 5 mL min(-1) without significant effect on As(V) retention. The presence of anions decreased the retention of As(V) with sulfate and phosphate having the greatest impact. MDLs were 0.004 mg L(-1) for both inorganic species. Spike recoveries in 0.01 M NaNO(3) mine waste extracts averaged 94% for As(III) and 107% for As(V).
