Michalska Agata J, Appaih-Kusi Charles, Heng Lee Yook, Walkiewicz Sebastian, Hall Elizabeth A H
Institute of Biotechnology, University of Cambridge, Tennis Court Road, Cambridge, CB2 1QT U.K.
Anal Chem. 2004 Apr 1;76(7):2031-9. doi: 10.1021/ac0353132.
The goal was to identify formulations for use in valinomycin K(+) ion-selective electrodes that could routinely achieve a detection limit of <10(-6) M, even after repeated use and exposure at higher K+ activity (0.1 M) and without the requirement for special pretreatment or conditioning in low K+ activity (10(-3) M). Electrodes that would be characterized by high potential stability were sought in this work. Valinomycin-containing membranes with diffusion coefficient of approximately 10(-11) cm(2) s(-1), formulated from methacrylic/acrylic polymers with or without plasticizer, were compared with plasticized PVC membranes (diffusion coefficient 10(-8) cm(2) s(-1)). The methacrylic/acrylic membranes without plasticizer were shown to give an order of magnitude lower detection limit, when compared with PVC-dioctyl sebacate and o-nitrophenyl octyl ether plasticized methacrylic/acrylic polymers under the same conditions, highlighting the influence of plasticizer on the detection limit. As predicted from current theoretical derivation, the inner contacting layer in the ion-selective electrode construction was shown to be highly influential in maintaining the detection limit below 10(-6) M with use and with poly(pyrrole) providing the inner contact ion-to-electron transduction function, a further order of magnitude improvement in the lower detection limit could be maintained for both chloride and hexacyanoferrate doped poly(pyrrole), when 2% ionophore was employed in the ion-selective membrane. This formulation showed extraordinary stability and reproducibility in terms of measurement range and drift over extended measurement testing, with close to Nernstian slopes. At higher ionophore concentrations (4%), the apparent selectivity of the electrode was improved at the expense of detection limit and the nature of the poly(pyrrole) dopant ion became important in determining the dominant exchange processes at the poly(pyrrole)/ion-selective membrane interface.
目标是确定用于缬氨霉素钾离子选择性电极的配方,即使在高钾离子活性(0.1 M)下反复使用和暴露后,且无需在低钾离子活性(10⁻³ M)下进行特殊预处理或调节,也能常规实现<10⁻⁶ M的检测限。这项工作旨在寻找具有高电位稳定性的电极。将由含或不含增塑剂的甲基丙烯酸/丙烯酸聚合物制成的、扩散系数约为10⁻¹¹ cm² s⁻¹的含缬氨霉素膜与增塑聚氯乙烯膜(扩散系数10⁻⁸ cm² s⁻¹)进行了比较。结果表明,在相同条件下,与癸二酸二辛酯和邻硝基苯基辛基醚增塑的甲基丙烯酸/丙烯酸聚合物相比,不含增塑剂的甲基丙烯酸/丙烯酸膜的检测限低一个数量级,突出了增塑剂对检测限的影响。正如当前理论推导所预测的,离子选择性电极结构中的内接触层在保持检测限低于10⁻⁶ M的使用过程中具有高度影响力,当在离子选择性膜中使用2%的离子载体时,对于掺杂氯和六氰合铁酸盐的聚吡咯,检测下限可进一步提高一个数量级。该配方在扩展测量测试的测量范围和漂移方面表现出非凡的稳定性和重现性,接近能斯特斜率。在较高的离子载体浓度(4%)下,电极的表观选择性提高,但以检测限为代价,并且聚吡咯掺杂离子的性质在确定聚吡咯/离子选择性膜界面处的主要交换过程中变得很重要。