Xu Jian-Wei, Zaporojan Victor, Peretti Giuseppe M, Roses Robert E, Morse Kenneth B, Roy Amit K, Mesa John M, Randolph Mark A, Bonassar Lawrence J, Yaremchuk Michael J
Division of Plastic Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, 02114, USA.
Plast Reconstr Surg. 2004 Apr 15;113(5):1361-71. doi: 10.1097/01.prs.0000111594.52661.29.
Injectable engineered cartilage that maintains a predictable shape and volume would allow recontouring of craniomaxillofacial irregularities with minimally invasive techniques. This study investigated how chondrocytes from different cartilage sources, encapsulated in fibrin polymer, affected construct mass and volume with time. Swine auricular, costal, and articular chondrocytes were isolated and mixed with fibrin polymer (cell concentration of 40 x 10 cells/ml for all groups). Eight samples (1 cm x 1 cm x 0.3 cm) per group were implanted into nude mice for each time period (4, 8, and 12 weeks). The dimensions and mass of each specimen were recorded before implantation and after explantation. Ratios comparing final measurements and original measurements were calculated. Histological, biochemical, and biomechanical analyses were performed. Histological evaluations (n = 3) indicated that new cartilaginous matrix was synthesized by the transplanted chondrocytes in all experimental groups. At 12 weeks, the ratios of dimension and mass (n = 8) for auricular chondrocyte constructs increased by 20 to 30 percent, the ratios for costal chondrocyte constructs were equal to the initial values, and the ratios for articular chondrocyte constructs decreased by 40 to 50 percent. Constructs made with auricular chondrocytes had the highest modulus (n = 3 to 5) and glycosaminoglycan content (n = 4 or 5) and the lowest permeability value (n = 3 to 5) and water content (n = 4 or 5). Constructs made with articular chondrocytes had the lowest modulus and glycosaminoglycan content and the highest permeability value and water content (p < 0.05). The amounts of hydroxyproline (n = 5) and DNA (n = 5) were not significantly different among the experimental groups (p > 0.05). It was possible to engineer injectable cartilage with chondrocytes from different sources, resulting in neocartilage with different properties. Although cartilage made with articular chondrocytes shrank and cartilage made with auricular chondrocytes overgrew, the injectable tissue-engineered cartilage made with costal chondrocytes was stable during the time periods studied. Furthermore, the biomechanical properties of the engineered cartilage made with auricular or costal chondrocytes were superior to those of cartilage made with articular chondrocytes, in this model.
可注射的工程化软骨若能保持可预测的形状和体积,将可通过微创技术对颅颌面畸形进行重塑。本研究调查了封装在纤维蛋白聚合物中的不同软骨来源的软骨细胞如何随时间影响构建体的质量和体积。分离猪的耳廓、肋和关节软骨细胞,并与纤维蛋白聚合物混合(所有组的细胞浓度均为40×10个细胞/毫升)。每个时间段(4周、8周和12周)每组将8个样本(1厘米×1厘米×0.3厘米)植入裸鼠体内。记录每个样本在植入前和取出后的尺寸和质量。计算最终测量值与原始测量值的比率。进行了组织学、生化和生物力学分析。组织学评估(n = 3)表明,所有实验组中移植的软骨细胞均合成了新的软骨基质。在12周时,耳廓软骨细胞构建体的尺寸和质量比率(n = 8)增加了20%至30%,肋软骨细胞构建体的比率与初始值相等,关节软骨细胞构建体的比率下降了40%至50%。用耳廓软骨细胞制成的构建体具有最高的模量(n = 3至5)和糖胺聚糖含量(n = 4或5)以及最低的渗透率值(n = 3至5)和含水量(n = 4或5)。用关节软骨细胞制成的构建体具有最低的模量和糖胺聚糖含量以及最高的渗透率值和含水量(p < 0.05)。实验组之间羟脯氨酸(n = 5)和DNA(n = 5)的含量无显著差异(p > 0.05)。利用不同来源的软骨细胞制造可注射软骨是可行的,可产生具有不同特性的新软骨。尽管用关节软骨细胞制成的软骨会收缩,用耳廓软骨细胞制成的软骨会过度生长,但在研究的时间段内,用肋软骨细胞制成的可注射组织工程软骨是稳定的。此外,在此模型中,用耳廓或肋软骨细胞制成的工程化软骨的生物力学特性优于用关节软骨细胞制成的软骨。