[Temperature distribution and geometry of the electrodes in RF interstitial hyperthermia using circular and interstitial electrodes].

To evaluate the feasibility of clinical application of a newly developed interstitial hyperthermia system, which consists of an 8 MHz radiofrequency generator, interstitial needle electrodes, and a superficial circular electrode, we conducted preclinical experiments using an agar phantom and VX-2 carcinoma in the rabbit. In the experiment with an agar phantom, four 4 cm needle electrodes were placed in a square array at intervals of 1.0, 1.5, and 2.0 cm. Thermography demonstrated homogeneous temperature distribution at electrode intervals of 1.0 and 1.5 cm, but hot spots around the electrodes at an interval of 2.0 cm. When electrode deviation was less than 8 degrees from the parallel plane, no temperature deviation was observed. Using two 2 cm electrodes and two 4 cm electrodes in square array, thermography demonstrated a homogeneous temperature distribution in the area surrounded by the electrodes. Even if the electrodes were located at the periphery of the agar phantom, a homogeneous temperature distribution was obtained in the area surrounded by the electrodes. Using four 4 cm electrodes at intervals of 1.5 cm in VX-2 carcinoma in the rabbit, ideal heating was obtained: 42 degrees C at the periphery of the tumor and 43 degrees C at the center. These data suggest that the newly developed interstitial hyperthermia apparatus provides homogeneous heat distribution at electrode intervals of 1.5 cm or less and can be used in a Phase I study for deep-seated or superficial tumors.