Mackay F
Institute of Dental Surgery, London.
Br J Orthod. 1992 Feb;19(1):35-9. doi: 10.1179/bjo.19.1.35.
Fine-mesh based brackets were bonded to plastic cylinders using four different adhesives. Adhesive thickness was controlled using a bonding jig. The bond was then tested to failure using a shear force. Each adhesive had its own minimum thickness, probably related to its viscosity. Increasing the thickness of the adhesiveness to 0.26 mm, using a stainless steel spacer had minimal effect on their mean shear bond strength.
基于细网格的托槽使用四种不同的粘合剂粘结到塑料圆柱体上。使用粘结夹具控制粘合剂的厚度。然后使用剪切力测试粘结直至失效。每种粘合剂都有其自身的最小厚度，这可能与其粘度有关。使用不锈钢垫片将粘合剂厚度增加到0.26毫米对其平均剪切粘结强度的影响最小。
