Suppr超能文献

[使用猪模型评估不同的16排CT结肠成像方案]

[Evaluation of different 16-row CT colonography protocols using a porcine model].

作者信息

Luz O, Schäfer J, Dammann F, Vonthein R, Heuschmid M, Claussen C D

机构信息

Abteilung für Radiologische Diagnostik, Universität Tübingen.

出版信息

Rofo. 2004 Oct;176(10):1493-500. doi: 10.1055/s-2004-813407.

Abstract

PURPOSE

To develop and to test an easily produced biological colon model with simulated polypoid lesions. Application of this phantom for the selection of an optimized scan protocol of 16-row CT colonography (CTC) for clinical use.

METHODS AND MATERIAL

Six polypoid lesions (1 - 6 mm) were simulated with sutures on the inner face of a porcine colon segment (20 cm). After distending the colon segment with air, the phantom was placed in a water quench and CT scans were performed on a MDCT-scanner (Somatom Sensation 16, Siemens, Forchheim). At constant values for collimation (16x0.75 mm) and voltage (120 kV), 54 different combinations of mAs values (50, 75 and 100 mAs), pitch factors (1, 1.25 and 1.5) and slice thicknesses (0.75, 1.0, 1.5, 2.0, 3.0 and 5.0 mm) were tested systematically. The phantom was scanned in the longitudinal and transverse axis to simulate the different orientation of the colon in the abdomen. Axial slice images and virtual endoscopic views of all data sets were presented separately to 2 radiologists who independently determined number and size of detectable polyps. Dose exposure was measured with an Alderson phantom.

RESULTS

The colon model offered a realistic imitation of a polyp-covered, human colon. The experimental set-up allowed a systematic evaluation of polyp detection related to lesion size, orientation of the colon and CTC parameters, with other influencing factors mostly excluded. Polyps were significantly better detected in the longitudinal than in the transverse orientation of the colon. For the detection of lesions of at least 3 mm, a low dose (50 mAs) 16-row CTC should be combined with a pitch of 1.5 and a maximum slice thickness of 3 mm. For the depiction of polyps smaller than 3 mm, slice thickness and pitch should amount to 1 mm and 1.0, respectively. Effective dose of this low dose protocol is 4.08 mSv.

CONCLUSION

The porcine colon phantom represents a realistic and easily produced alternative to other colonography models. It allows a preselection of a CTC-protocol for subsequent clinical testings. If the high in vitro performance of the low-dose 16-row CTC-protocol is confirmed on a human collective, the use of 16-row technique would represent a big step for CTC toward a screening method.

摘要

目的

开发并测试一种易于制作的带有模拟息肉样病变的生物结肠模型。将该模型应用于选择优化的16排CT结肠成像(CTC)扫描方案以供临床使用。

方法与材料

在一段猪结肠(20厘米)内表面用缝线模拟六个息肉样病变(1 - 6毫米)。用空气扩张结肠段后,将模型置于水模中,在多排螺旋CT扫描仪(Somatom Sensation 16,西门子,福尔希海姆)上进行CT扫描。在准直(16×0.75毫米)和电压(120千伏)恒定的情况下,系统测试了54种不同的管电流(50、75和100毫安秒)、螺距因子(1、1.25和1.5)和层厚(0.75、1.0、1.5、2.0、3.0和5.0毫米)组合。对模型进行纵轴和横轴扫描以模拟结肠在腹部的不同方位。将所有数据集的轴位断层图像和虚拟内镜视图分别呈现给2名放射科医生,他们独立确定可检测息肉的数量和大小。用Alderson水模测量剂量暴露。

结果

结肠模型逼真地模拟了有息肉覆盖的人体结肠。该实验设置允许系统评估与病变大小、结肠方位和CTC参数相关的息肉检测情况,基本排除了其他影响因素。结肠纵轴方向检测息肉明显优于横轴方向。对于检测至少3毫米的病变,低剂量(50毫安秒)16排CTC应结合螺距1.5和最大层厚3毫米。对于描绘小于3毫米的息肉,层厚和螺距应分别为1毫米和1.0。该低剂量方案的有效剂量为4.08毫希沃特。

结论

猪结肠模型是其他结肠成像模型的一种现实且易于制作的替代方案。它允许为后续临床试验预选CTC方案。如果低剂量16排CTC方案在人体群体中证实具有较高的体外性能,16排技术的应用将是CTC迈向筛查方法的重要一步。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验