Edlich Richard F, Winters Kathryne L, Woodard Charles R, Buschbacher Ralph M, Long William B, Gebhart Jocelynn H, Ma Eva K
Plastic Surgical Research Program, University of Virginia Health System, Charlottesville, Virginia, USA.
J Long Term Eff Med Implants. 2004;14(4):285-304. doi: 10.1615/jlongtermeffmedimplants.v14.i4.20.
The purpose of this collective review is to outline the predisposing factors in the development of pressure ulcers and to identify a pressure ulcer prevention program. The most frequent sites for pressure ulcers are areas of skin overlying bony prominences. There are four critical factors contributing to the development of pressure ulcers: pressure, shearing forces, friction, and moisture. Pressure is now viewed as the single most important etiologic factor in pressure ulcer formation. Prolonged immobilization, sensory deficit, circulatory disturbances, and poor nutrition have been identified as important risk factors in the development of pressure ulcer formation. Among the clinical assessment scales available, only two, the Braden Scale and Norton Scale, have been tested extensively for reliability and/or validity. The most commonly used risk assessment tools for pressure ulcer formation are computerized pressure monitoring and measurement of laser Doppler skin blood flow. Pressure ulcers can predispose the patient to a variety of complications that include bacteremia, osteomyelitis, squamous cell carcinoma, and sinus tracts. The three components of pressure ulcer prevention that must be considered in any patient include management of incontinence, nutritional support, and pressure relief. The pressure relief program must be individualized for non-weight-bearing individuals as well as those that can bear weight. For those that can not bear weight and passively stand, the RENAISSANCE Mattress Replacement System is recommended for the immobile patient who lies supine on the bed, the stretcher, or operating room table. This alternating pressure system is unique because it has three separate cells that are not interconnected. It is specifically designed so that deflation of each individual cell will reach a ZERO PRESSURE during each alternating pressure cycle. The superiority of this system has been documented by comprehensive clinical studies in which this system has been compared to the standard hospital bed as well as to two other commercially available pressure relief mattresses. The most recent advance in pressure ulcer prevention is the development of the ALTERN8* seating system. This seating system provides regular periods of pressure relief and stimulation of blood flow to skin areas while users are seated. By offering the combination of pressure relief therapy and an increase in blood flow, the ALTERN8* reportedly creates an optimum pressure ulcer healing environment. Foam is the most commonly used material for pressure reduction and pressure ulcer prevention and treatment for the mobile individual. For those immobilized individuals who can achieve a passive standing position, a powered wheelchair that allows the individual to achieve a passive standing position is recommended. The beneficial effects of passive standing have been documented by comprehensive scientific studies. These benefits include reduction of seating pressure, decreased bone demineralization, increased blander pressure, enhanced orthostatic circulatory regulation, reduction in muscular tone, decrease in upper extremity muscle stress, and enhanced functional status in general. In the absence of these dynamic alternating pressure seating systems and mattresses, there are enormous medicolegal implications to the healthcare facility. Because there is not sufficient staff to provide pressure relief to rotate the patient every 2 hours in a hospital setting, with the exception of the intensive care unit, the immobile patient is prone to develop pressure ulcers. The cost of caring for these preventable pressure ulcers may now be as high as 60,000 dollars per patient. The occupational physical strain sustained by nursing personnel in rotating their patients has led to occupational back pain in nurses, a major source of morbidity in the healthcare environment.
这篇综述的目的是概述压疮形成的诱发因素,并确定一个压疮预防方案。压疮最常见的部位是覆盖骨隆突的皮肤区域。导致压疮形成的有四个关键因素:压力、剪切力、摩擦力和潮湿。现在认为压力是压疮形成中最重要的单一病因。长期制动、感觉障碍、循环障碍和营养不良已被确定为压疮形成的重要危险因素。在现有的临床评估量表中,只有Braden量表和Norton量表经过了广泛的可靠性和/或有效性测试。压疮形成最常用的风险评估工具是计算机化压力监测和激光多普勒皮肤血流测量。压疮会使患者易发生多种并发症,包括菌血症、骨髓炎、鳞状细胞癌和窦道。任何患者预防压疮都必须考虑的三个组成部分包括失禁管理、营养支持和减压。减压方案必须针对非负重个体以及能够负重的个体进行个体化定制。对于那些不能负重且需被动站立的患者,对于仰卧在床上、担架上或手术台上的不能活动的患者,推荐使用RENAISSANCE床垫更换系统。这种交替压力系统很独特,因为它有三个不相互连接的独立单元。它经过专门设计,以便在每个交替压力周期中,每个单独单元的放气都能达到零压力。该系统的优越性已在综合临床研究中得到证实,在这些研究中,该系统与标准医院病床以及另外两种市售减压床垫进行了比较。压疮预防的最新进展是开发了ALTERN8座椅系统。这种座椅系统在使用者就座时能定期减轻压力并促进皮肤区域的血流。通过提供减压治疗和增加血流的组合,据报道ALTERN8创造了最佳的压疮愈合环境。泡沫是为可活动个体减轻压力以及预防和治疗压疮最常用的材料。对于那些能够实现被动站立姿势的不能活动的个体,推荐使用能使个体实现被动站立姿势的电动轮椅。被动站立的有益效果已在综合科学研究中得到证实。这些益处包括减轻就座压力、减少骨质流失、增加血压、增强直立循环调节、降低肌肉张力、减轻上肢肌肉压力以及总体上改善功能状态。在没有这些动态交替压力座椅系统和床垫的情况下,医疗机构会面临巨大的医疗法律问题。因为在医院环境中,除了重症监护病房外,没有足够的工作人员每2小时为患者翻身减压,不能活动的患者容易发生压疮。护理这些可预防压疮的成本现在可能高达每位患者6万美元。护理人员在为患者翻身时承受的职业身体压力导致了护士的职业背痛,这是医疗环境中发病的一个主要原因。