Disselkamp R S, Hart T R, Williams A M, White J F, Peden C H F
Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, 3335 Q Avenue, P.O. Box 999, Richland, WA 99352, USA.
Ultrason Sonochem. 2005 Mar;12(4):319-24. doi: 10.1016/j.ultsonch.2003.12.006.
The hydrogenation, employing hydrogen gas, of cinnamaldehyde was performed using Pd-black and Raney Ni catalysts at 298+/-3 K in a water-cooled (jacketed) reaction vessel. Sampling at pre-determined time intervals and GC/MS analysis yielded time-dependent product state distribution information. A kinetic modeling of the data revealed that cinnamaldehyde was both hydrogenated directly to the final product benzenepropanol, as well as a fraction being converted to the intermediate benzenepropanal, where the latter was subsequently hydrogenated to benzenepropanol. Comparing the ultrasound-assisted and blank (stirred) experiments revealed that a higher maximum relative concentration of the intermediate benzenepropanal was formed in the ultrasound experiments compared to the stirred experiment. The activity of the ultrasound experiments compared to blank were 9-fold and 20-fold greater for the Pd-black and Raney Ni catalysts, respectively. Finally, an application of the Bell-Evans-Polanyi principle to yield an estimate of the ratio of rate coefficients for benzenepropanal and benzenepropanol formation was performed by considering chemical group energy differences and surface adsorption energy differences in the first mechanistic step of hydrogenation.
