Kumar Shaleen, Burke Kevin, Nalder Colin, Jarrett Paula, Mubata Cephas, A'hern Roger, Humphreys Mandy, Bidmead Margaret, Brada Michael
Radiotherapy Physics, The Royal Marsden NHS Trust, Fulham Road, London SW3 6JJ2, UK.
Radiother Oncol. 2005 Jan;74(1):53-9. doi: 10.1016/j.radonc.2004.06.008.
To assess the geometric accuracy of the delivery of fractionated stereotactic radiotherapy (FSRT) for brain tumours using the Gill-Thomas-Cosman (GTC) relocatable frame. Accuracy of treatment delivery was measured via portal images acquired with an amorphous silicon based electronic portal imager (EPI). Results were used to assess the existing verification process and to review the current margins used for the expansion of clinical target volume (CTV) to planning target volume (PTV).
Patients were immobilized in a GTC frame. Target volume definition was performed on localization CT and MRI scans and a CTV to PTV margin of 5mm (based on initial experience) was introduced in 3D. A Brown-Roberts-Wells (BRW) fiducial system was used for stereotactic coordinate definition. The existing verification process consisted of an intercomparison of the coordinates of the isocentres and anatomy between the localization and verification CT scans. Treatment was delivered with 6 MV photons using four fixed non-coplanar conformal fields using a multi-leaf collimator. Portal imaging verification consisted of the acquisition of orthogonal images centred through the treatment isocentre. Digitally reconstructed radiographs (DRRs) created from the CT localization scans were used as reference images. Semi-automated matching software was used to quantify set up deviations (displacements and rotations) between reference and portal images.
One hundred and twenty six anterior and 123 lateral portal images were available for analysis for set up deviations. For displacements, the total errors in the cranial/caudal direction were shown to have the largest SD's of 1.2 mm, while systematic and random errors reached SD's of 1.0 and 0.7 mm, respectively, in the cranial/caudal direction. The corresponding data for rotational errors (the largest deviation was found in the sagittal plane) was 0.7 degrees SD (total error), 0.5 degrees (systematic) and 0.5 degrees (random). The total 3D displacement was 1.8 mm (mean), 0.8 mm (SD) with a range of 0.3-3.9 mm.
Portal imaging has shown that the existing verification and treatment delivery techniques currently in use result in highly reproducible setups. Random and systematic errors in the treatment planning and delivery chain will always occur, but monitoring and minimising them is an essential component of quality control. Portal imaging provides fast and accurate facility for monitoring patients on treatment and the results of this study have shown that a reduction in CTV to PTV margin from 5 to 4 mm (resulting in a considerable increase in the volume of normal tissue sparing) could be made.
使用吉尔 - 托马斯 - 科斯曼(GTC)可重复定位框架评估脑肿瘤分次立体定向放射治疗(FSRT)的射束几何精度。通过使用基于非晶硅的电子射野影像装置(EPI)获取的射野图像测量治疗射束的精度。结果用于评估现有的验证过程,并审查当前用于将临床靶体积(CTV)扩展到计划靶体积(PTV)的边界。
患者固定于GTC框架中。在定位CT和MRI扫描上进行靶体积定义,并在三维空间中引入基于初始经验的5mm CTV到PTV边界。使用布朗 - 罗伯茨 - 韦尔斯(BRW)基准系统进行立体定向坐标定义。现有的验证过程包括对定位CT扫描和验证CT扫描之间等中心坐标和解剖结构的相互比较。使用多叶准直器,采用6MV光子通过四个固定的非共面适形野进行治疗。射野影像验证包括获取以治疗等中心为中心的正交图像。由CT定位扫描生成的数字重建射线影像(DRR)用作参考图像。使用半自动匹配软件量化参考图像和射野图像之间的摆位偏差(位移和旋转)。
有126张前后位和123张侧位射野图像可用于分析摆位偏差。对于位移,颅尾方向的总误差显示标准差最大,为1.2mm,而颅尾方向的系统误差和随机误差分别达到1.0mm和0.7mm的标准差。旋转误差(矢状面偏差最大)的相应数据为0.7度标准差(总误差)、0.5度(系统误差)和0.5度(随机误差)。三维总位移为1.8mm(平均值),0.8mm(标准差),范围为0.3 - 3.9mm。
射野影像显示,目前使用的现有验证和治疗射束技术可实现高度可重复的摆位。治疗计划和射束传输链中的随机误差和系统误差总会出现,但监测并将其最小化是质量控制的重要组成部分。射野影像为监测治疗中的患者提供了快速且准确的手段,本研究结果表明,可将CTV到PTV的边界从5mm减小到4mm(从而显著增加正常组织受照体积的减少量)。