Department of Radiation Oncology, Christian Medical College, Vellore, India.
J Appl Clin Med Phys. 2010 Dec 28;12(2):3260. doi: 10.1120/jacmp.v12i2.3260.
The present study is aimed at determination of accuracy of relocation of Gill-Thomas-Cosman frame during fractionated stereotactic radiotherapy. The study aims to quantitatively determine the magnitudes of error in anteroposterior, mediolateral and craniocaudal directions, and determine the margin between clinical target volume to planning target volume based on systematic and random errors. Daily relocation error was measured using depth helmet and measuring probe. Based on the measurements, translational displacements in anteroposterior (z), mediolateral (x), and craniocaudal (y) directions were calculated. Based on the displacements in x, y and z directions, systematic and random error were calculated and three-dimensional radial displacement vector was determined. Systematic and random errors were used to derive CTV to PTV margin. The errors were within ± 2 mm in 99.2% cases in anteroposterior direction (AP), in 99.6% cases in mediolateral direction (ML), and in 97.6% cases in craniocaudal direction (CC). In AP, ML and CC directions, systematic errors were 0.56, 0.38, 0.42 mm and random errors were 1.86, 1.36 and 0.73 mm, respectively. Mean radial displacement was 1.03 mm ± 0.34. CTV to PTV margins calculated by ICRU formula were 1.86, 1.45 and 0.93 mm; by Stroom's formula they were 2.42, 1.74 and 1.35 mm; by van Herk's formula they were 2.7, 1.93 and 1.56 mm (AP, ML and CC directions). Depth helmet with measuring probe provides a clinically viable way for assessing the relocation accuracy of GTC frame. The errors were within ± 2 mm in all directions. Systematic and random errors were more along the anteroposterior axes. According to the ICRU formula, a margin of 2 mm around the tumor seems to be adequate.
本研究旨在确定分次立体定向放疗中吉尔-托马斯-科斯曼(Gill-Thomas-Cosman)框架重定位的准确性。该研究旨在定量确定前后、左右和头尾方向的误差幅度,并根据系统和随机误差确定临床靶区(CTV)与计划靶区(PTV)之间的边界。使用深度头盔和测量探头测量每日重定位误差。根据这些测量值,计算前后(z)、左右(x)和头尾(y)方向的平移位移。根据 x、y 和 z 方向的位移,计算系统和随机误差,并确定三维径向位移矢量。使用系统误差和随机误差来推导出 CTV 到 PTV 的边界。在前后方向(AP),99.2%的病例误差在±2mm 以内;在左右方向(ML),99.6%的病例误差在±2mm 以内;在头尾方向(CC),97.6%的病例误差在±2mm 以内。在 AP、ML 和 CC 方向,系统误差分别为 0.56、0.38 和 0.42mm,随机误差分别为 1.86、1.36 和 0.73mm。平均径向位移为 1.03mm±0.34mm。根据 ICRU 公式计算的 CTV 到 PTV 的边界分别为 1.86、1.45 和 0.93mm;根据 Stroom 公式计算的边界分别为 2.42、1.74 和 1.35mm;根据 van Herk 公式计算的边界分别为 2.7、1.93 和 1.56mm(AP、ML 和 CC 方向)。带测量探头的深度头盔为评估 GTC 框架的重定位准确性提供了一种可行的临床方法。所有方向的误差均在±2mm 以内。系统误差和随机误差主要沿前后轴方向。根据 ICRU 公式,肿瘤周围 2mm 的边界似乎足够。